9 material differences · fewer than 12
Tractor oneCase-IH 92501990–1995No measured PTO figureTractor twoJohn Deere 87601989–1993No measured PTO figure
Which should you choose?
Read our verdict on the 9250 and the 8760 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 9250 | 8760 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 296.0 hp | 296.1 hp | — |
| Engine declared | CUMMINS LTA-10 | John Deere 6.101 HRW-02 | differs |
| Displacement declared | 10.01 L | 10.14 L | — |
| Maximum torque declared | 977 lb·ft · 1,324 N·m | 904 lb·ft · 1,225 N·m | +8% 9250 |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6–21.7 mph · 30–35 km/h | differs |
| Clutch declared | Oil-immersed multi-plate clutch | — | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Closed centre | — |
| Pump flow declared | 27.8 gpm · 105.2 L/min | — | — |
| Pressure declared | 2,306 psi · 159 bar | 2,538 psi · 175 bar | +10% 8760 |
| Rear PTO speeds declared | 1000 rpm | 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 30,060 lb · 13,635 kg | 32,088 lb · 14,555 kg | +7% 8760 |
| Wheelbase declared | 130.0 in · 3,302 mm | 133.9 in · 3,400 mm | — |
| Length declared | 264.0 in · 6,706 mm | 286.1 in · 7,266 mm | +8% 8760 |
| Width declared | 119.5–148.3 in · 3,035–3,767 mm | 139.8–150.6 in · 3,550–3,825 mm | differs |
| Height, over the cab declared | 139.1 in · 3,532 mm | 137.0 in · 3,480 mm | — |
| Ground clearance declared | 14.8 in · 377 mm | 13.9 in · 353 mm | +7% 9250 |
| Fuel tank declared | 799.9 qt · 757.0 L | 882.3 qt · 835.0 L | +10% 8760 |
Case-IH 9250 sources
Source
- Source: Traktorenlexikon, “Case-IH 9250”
John Deere 8760 sources
Source
- Source: Traktorenlexikon, “John Deere 8760”