7 material differences · fewer than 12
Tractor oneCase-IH 92501990–1995No measured PTO figureTractor twoFord FW-401977–1982No measured PTO figure
Which should you choose?
Read our verdict on the 9250 and the FW-40 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | 9250 | FW-40 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 296.0 hp | 295 hp | — |
| Engine declared | CUMMINS LTA-10 | Cummins V-903 | differs |
| Displacement declared | 10.01 L | 14.80 L | +48% FW-40 |
| Maximum torque declared | 977 lb·ft · 1,324 N·m | — | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6–21.7 mph · 30–35 km/h | differs |
| Clutch declared | Oil-immersed multi-plate clutch | Hydraulically operated dry double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 27.8 gpm · 105.2 L/min | 20.0 gpm · 75.7 L/min | +39% 9250 |
| Pressure declared | 2,306 psi · 159 bar | — | — |
| Rear PTO speeds declared | 1000 rpm | 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 30,060 lb · 13,635 kg | 30,631 lb · 13,894 kg | — |
| Wheelbase declared | 130.0 in · 3,302 mm | 132.5 in · 3,365 mm | — |
| Length declared | 264.0 in · 6,706 mm | 267.0 in · 6,782 mm | — |
| Width declared | 119.5–148.3 in · 3,035–3,767 mm | — | — |
| Height, over the cab declared | 139.1 in · 3,532 mm | 134.3 in · 3,411 mm | — |
| Ground clearance declared | 14.8 in · 377 mm | 12.0 in · 305 mm | +24% 9250 |
| Fuel tank declared | 799.9 qt · 757.0 L | 899.9 qt · 851.6 L | +12% FW-40 |
Case-IH 9250 sources
Source
- Source: Traktorenlexikon, “Case-IH 9250”
Ford FW-40 sources
Source
- Source: Traktorenlexikon, “Ford FW-40”
- Source: Traktorenlexikon, “Ford FW-30”