10 material differences · fewer than 12
Tractor oneCase-IH 92501990–1995No measured PTO figureTractor twoFord 8761988–1993No measured PTO figure
Which should you choose?
Read our verdict on the 9250 and the 876 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 9250 | 876 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 296.0 hp | 280.1 hp | +6% 9250 |
| Engine declared | CUMMINS LTA-10 | CUMMINS LTA 10-A 280 | differs |
| Displacement declared | 10.01 L | 10.00 L | — |
| Maximum torque declared | 977 lb·ft · 1,324 N·m | 895 lb·ft · 1,214 N·m | +9% 9250 |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 15.5 mph · 25 km/h | +20% 9250 |
| Clutch declared | Oil-immersed multi-plate clutch | Pedal-operated, dry single-plate clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 27.8 gpm · 105.2 L/min | 25.2 gpm · 95.4 L/min | +10% 9250 |
| Pressure declared | 2,306 psi · 159 bar | — | — |
| Rear PTO speeds declared | 1000 rpm | 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 30,060 lb · 13,635 kg | 28,058 lb · 12,727 kg | +7% 9250 |
| Maximum permissible mass declared | — | 29,542 lb · 13,400 kg | — |
| Wheelbase declared | 130.0 in · 3,302 mm | 130.0 in · 3,302 mm | — |
| Length declared | 264.0 in · 6,706 mm | 260.0 in · 6,604 mm | — |
| Width declared | 119.5–148.3 in · 3,035–3,767 mm | 124.0 in · 3,150 mm | differs |
| Height, over the cab declared | 139.1 in · 3,532 mm | 125.0 in · 3,175 mm | +11% 9250 |
| Ground clearance declared | 14.8 in · 377 mm | 16.1 in · 410 mm | +9% 876 |
| Fuel tank declared | 799.9 qt · 757.0 L | 985.9 qt · 933.0 L | +23% 876 |
Case-IH 9250 sources
Source
- Source: Traktorenlexikon, “Case-IH 9250”
Ford 876 sources
Source
- Source: Traktorenlexikon, “Ford Ford 876”