6 material differences · fewer than 12
Tractor oneCase-IH 91801987–1990No measured PTO figureTractor twoCase-IH 92801990–1995No measured PTO figure
Which should you choose?
Read our verdict on the 9180 and the 9280 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 9 fields identical or within 5%, which is not counted as material
| Field | 9180 | 9280 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 369.9 hp | 374.8 hp | — |
| Engine declared | CUMMINS NTA-885 A | CUMMINS NTA-855 A | differs |
| Displacement declared | 14.02 L | 10.02 L | +40% 9180 |
| Maximum torque declared | 1,235 lb·ft · 1,674 N·m | 1,265 lb·ft · 1,715 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | Oil-immersed multiple-disc driving clutch with 228.6 mm disc diameter | Oil-immersed multi-plate driving clutch with disc diameter 228.6 mm | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 31.0 gpm · 117.3 L/min | 30.3 gpm · 114.7 L/min | — |
| Pressure declared | 3,002 psi · 207 bar | 2,306 psi · 159 bar | +30% 9180 |
| Rear PTO speeds declared | 1000 rpm | 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 35,583 lb · 16,140 kg | 34,674 lb · 15,728 kg | — |
| Wheelbase declared | 141.5 in · 3,594 mm | 76.5–132.6 in · 1,943–3,368 mm | differs |
| Length declared | 281.9 in · 7,160 mm | 299.6 in · 7,610 mm | +6% 9280 |
| Width declared | 153.1 in · 3,890 mm | 153.1 in · 3,890 mm | — |
| Ground clearance declared | 16.7 in · 424 mm | 16.7 in · 424 mm | — |
| Fuel tank declared | 1,001.7 qt · 948.0 L | 1,001.7 qt · 948.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Case-IH 9180 sources
Source
- Source: Traktorenlexikon, “Case-IH 9180”
- Source: Traktorenlexikon, “Case-IH 9170”
Case-IH 9280 sources
Source
- Source: Traktorenlexikon, “Case-IH 9280”
- Source: Traktorenlexikon, “Case-IH 9270”