Case-IH 9150 vs New Holland TJ-275

10 material differences · fewer than 12

Tractor one

1987–1990

No measured PTO figure

Tractor two

2001–2005

No measured PTO figure

Which should you choose?

Read our verdict on the 9150 and the TJ-275 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 5 fields identical or within 5%, which is not counted as material

Case-IH 9150 and New Holland TJ-275, field by field
Field	9150	TJ-275	Gap
Engine
Engine power, claimed claimed	276.1 hp	271.3 hp	—
Engine declared	CUMMINS LTA-10 A	CUMMINS 6 TAA-8304	differs
Displacement declared	10.01 L	8.27 L	+21% 9150
Maximum torque declared	868 lb·ft · 1,177 N·m	954 lb·ft · 1,293 N·m	+10% TJ-275
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	Oil-bathed F.T.K. multi-plate driving clutch with disc diameter	—	—
Hydraulics & hitch
Pump flow declared	29.8 gpm · 112.8 L/min	40.9 gpm · 154.8 L/min	+37% TJ-275
Pressure declared	2,306 psi · 159 bar	—	—
Three-point lift at ends declared	13,263 lb · 6,016 kg	15,673 lb · 7,109 kg	+18% TJ-275
Rear PTO speeds declared	1000 rpm	1000 rpm	—
Weight & dimensions
Unladen weight declared	25,993 lb · 11,790 kg	31,795 lb · 14,422 kg	+22% TJ-275
Maximum permissible mass declared	—	33,069 lb · 15,000 kg	—
Wheelbase declared	130.0 in · 3,302 mm	139.0 in · 3,531 mm	+7% TJ-275
Length declared	276.8 in · 7,030 mm	276.0 in · 7,010 mm	—
Width declared	119.7 in · 3,040 mm	120.0 in · 3,048 mm	—
Height declared	145.7 in · 3,700 mm	137.0 in · 3,480 mm	+6% 9150
Ground clearance declared	17.7 in · 450 mm	13.0 in · 330 mm	+36% 9150
Turning radius, braked declared	20.9 ft · 6.38 m	—	—
Fuel tank declared	679.5 qt · 643.0 L	799.9 qt · 757.0 L	+18% TJ-275

Source

Source