7 material differences · fewer than 12
Tractor oneCase-IH 91501987–1990No measured PTO figureTractor twoNew Holland 9282 (Traktorenlexikon)1995–1999No measured PTO figure
Which should you choose?
Read our verdict on the 9150 and the 9282 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 9150 | 9282 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 276.1 hp | 256.4 hp | +8% 9150 |
| Engine declared | CUMMINS LTA-10 A | CUMMINS C 8.3 | differs |
| Displacement declared | 10.01 L | 8.27 L | +21% 9150 |
| Maximum torque declared | 868 lb·ft · 1,177 N·m | 746 lb·ft · 1,011 N·m | +16% 9150 |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | Oil-bathed F.T.K. multi-plate driving clutch with disc diameter | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 29.8 gpm · 112.8 L/min | 43.8 gpm · 165.7 L/min | +47% 9282 |
| Pressure declared | 2,306 psi · 159 bar | — | — |
| Rear PTO speeds declared | 1000 rpm | 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 25,993 lb · 11,790 kg | 24,972 lb · 11,327 kg | — |
| Maximum permissible mass declared | — | 29,220 lb · 13,254 kg | — |
| Wheelbase declared | 130.0 in · 3,302 mm | 133.1 in · 3,380 mm | — |
| Length declared | 276.8 in · 7,030 mm | 266.0 in · 6,756 mm | — |
| Width declared | 119.7–151.2 in · 3,040–3,840 mm | 150.4 in · 3,820 mm | differs |
| Ground clearance declared | 17.7 in · 450 mm | — | — |
| Turning radius, braked declared | 20.9 ft · 6.38 m | 14.4 ft · 4.40 m | +45% 9150 |
| Fuel tank declared | 679.5 qt · 643.0 L | 920.0 qt · 870.6 L | +35% 9282 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Case-IH 9150 sources
Source
- Source: Traktorenlexikon, “Case-IH 9150”
New Holland 9282 (Traktorenlexikon) sources
Source
- Source: Traktorenlexikon, “New Holland 9282”