Case-IH 9150 vs Case-IH STX 275

10 material differences · fewer than 12

Tractor one

1987–1990

No measured PTO figure

Tractor two

2000–2005

No measured PTO figure

Which should you choose?

Read our verdict on the 9150 and the STX 275 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 5 fields identical or within 5%, which is not counted as material

Case-IH 9150 and Case-IH STX 275, field by field
Field	9150	STX 275	Gap
Engine
Engine power, claimed claimed	276.1 hp	271.3 hp	—
Engine declared	CUMMINS LTA-10 A	CUMMINS 6 TAA-8304	differs
Displacement declared	10.01 L	8.27 L	+21% 9150
Maximum torque declared	868 lb·ft · 1,177 N·m	954 lb·ft · 1,293 N·m	+10% STX 275
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	Oil-bathed F.T.K. multi-plate driving clutch with disc diameter	—	—
Hydraulics & hitch
Pump flow declared	29.8 gpm · 112.8 L/min	58.0 gpm · 219.6 L/min	+95% STX 275
Pressure declared	2,306 psi · 159 bar	2,698 psi · 186 bar	+17% STX 275
Three-point lift at ends declared	13,263 lb · 6,016 kg	19,335 lb · 8,770 kg	+46% STX 275
Rear PTO speeds declared	1000 rpm	1000 rpm	—
Weight & dimensions
Unladen weight declared	25,993 lb · 11,790 kg	31,795 lb · 14,422 kg	+22% STX 275
Maximum permissible mass declared	—	33,069 lb · 15,000 kg	—
Wheelbase declared	130.0 in · 3,302 mm	139.0 in · 3,531 mm	+7% STX 275
Length declared	276.8 in · 7,030 mm	276.0 in · 7,010 mm	—
Width declared	119.7 in · 3,040 mm	120.0 in · 3,048 mm	—
Height declared	145.7 in · 3,700 mm	137.0 in · 3,480 mm	+6% 9150
Ground clearance declared	17.7 in · 450 mm	—	—
Turning radius, braked declared	20.9 ft · 6.38 m	—	—
Fuel tank declared	679.5 qt · 643.0 L	799.9 qt · 757.0 L	+18% STX 275

Source

Source