Case-IH 9110 vs International Harvester 3588

14 material differences

Tractor one

1987–1990

No measured PTO figure

Tractor two

1978–1981

No measured PTO figure

Which should you choose?

Read our verdict on the 9110 and the 3588 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

14 material differences · 1 fields identical or within 5%, which is not counted as material

Case-IH 9110 and International Harvester 3588, field by field
Field	9110	3588	Gap
Engine
Engine power, claimed claimed	197.3 hp	149.9 hp	+32% 9110
Engine declared	CUMMINS 6 CT-8.3	INTERNATIONAL HARVESTER DT-466 B	differs
Displacement declared	8.27 L	7.64 L	+8% 9110
Maximum torque declared	555 lb·ft · 752 N·m	450 lb·ft · 610 N·m	+23% 9110
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	F.T.K. multi-plate clutch running in oil bath with disc diameter	pedal-operated dry clutch	differs
Hydraulics & hitch
Pump flow declared	28.3 gpm · 107.1 L/min	12.0 gpm · 45.4 L/min	+136% 9110
Pressure declared	2,306 psi · 159 bar	—	—
Three-point lift at ends declared	13,375 lb · 6,067 kg	8,598 lb · 3,900 kg	+56% 9110
Rear PTO speeds declared	1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	20,150 lb · 9,140 kg	17,619 lb · 7,992 kg	+14% 9110
Wheelbase declared	120.4 in · 3,058 mm	110.0 in · 2,794 mm	+9% 9110
Length declared	244.5 in · 6,210 mm	228.0 in · 5,791 mm	+7% 9110
Width declared	119.7 in · 3,040 mm	101.6 in · 2,581 mm	+18% 9110
Height declared	129.5 in · 3,290 mm	115.8 in · 2,941 mm	+12% 9110
Ground clearance declared	14.5 in · 368 mm	23.2 in · 589 mm	+60% 3588
Turning radius, braked declared	19.2 ft · 5.85 m	—	—
Fuel tank declared	459.7 qt · 435.0 L	360.0 qt · 340.7 L	+28% 9110

Source

Source