9 material differences · fewer than 12
Tractor oneCase-IH 845 XL (A)1990–1996No measured PTO figureTractor twoVALMET 6651992–1997No measured PTO figure
Which should you choose?
Read our verdict on the 845 XL (A) and the 665 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 845 XL (A) | 665 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 78.9 hp | 78.9 hp | — |
| Engine declared | IH D-268 | VALMET 420 D | differs |
| Displacement declared | 4.39 L | 4.40 L | — |
| Maximum torque declared | 218 lb·ft · 296 N·m | 214 lb·ft · 290 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | — | Dry LuK double clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 8.6 gpm · 32.6 L/min | 13.8 gpm · 52.4 L/min | +61% 665 |
| Pressure declared | — | 2,901 psi · 200 bar | — |
| Rear PTO speeds declared | 540/1000 rpm | 540E/540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 8,069 lb · 3,660 kg | 7,231 lb · 3,280 kg | +12% 845 XL (A) |
| Maximum permissible mass declared | 12,787 lb · 5,800 kg | — | — |
| Wheelbase declared | 94.1 in · 2,390 mm | 94.1 in · 2,390 mm | — |
| Length declared | 144.9 in · 3,680 mm | 157.5 in · 4,000 mm | +9% 665 |
| Width declared | 80.7–88.6 in · 2,050–2,250 mm | 79.9 in · 2,030 mm | differs |
| Ground clearance declared | 19.1 in · 484 mm | 18.1 in · 460 mm | — |
| Turning radius, braked declared | 12.6 ft · 3.85 m | 15.7 ft · 4.80 m | +25% 665 |
| Fuel tank declared | 112.0 qt · 106.0 L | 77.1 qt · 73.0 L | +45% 845 XL (A) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Case-IH 845 XL (A) sources
- Source: Traktorenlexikon, “Case-IH 845XL”
VALMET 665 sources
- Source: Traktorenlexikon, “Valmet 665”