10 material differences · fewer than 12

Tractor oneCase-IH 845 XL (A)1990–1996No measured PTO figureTractor twoSAME Explorer 80 II (DT)1989–1998No measured PTO figure

Which should you choose?

Read our verdict on the 845 XL (A) and the Explorer 80 II (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 5 fields identical or within 5%, which is not counted as material

Case-IH 845 XL (A) and SAME Explorer 80 II (DT), field by field
Field	845 XL (A)	Explorer 80 II (DT)	Gap
Engine
Engine power, claimed claimed	78.9 hp	78.9 hp	—
Engine declared	IH D-268	SAME 1000.4 A 1	differs
Displacement declared	4.39 L	4.00 L	+10% 845 XL (A)
Maximum torque declared	218 lb·ft · 296 N·m	204 lb·ft · 276 N·m	+7% 845 XL (A)
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Hydraulics & hitch
Hydraulic control declared	—	Load sensing	—
Pump flow declared	8.6 gpm · 32.6 L/min	10.7 gpm · 40.5 L/min	+24% Explorer 80 II (DT)
Pressure declared	—	1,740 psi · 120 bar	—
Rear PTO speeds declared	540/1000 rpm	540/540E/1000E/1000 rpm	differs
Weight & dimensions
Unladen weight declared	8,069 lb · 3,660 kg	6,724 lb · 3,050 kg	+20% 845 XL (A)
Maximum permissible mass declared	12,787 lb · 5,800 kg	—	—
Wheelbase declared	94.1 in · 2,390 mm	95.1 in · 2,415 mm	—
Length declared	144.9 in · 3,680 mm	144.5 in · 3,670 mm	—
Width declared	80.7–88.6 in · 2,050–2,250 mm	81.1–104.7 in · 2,060–2,660 mm	differs
Height, over the cab declared	105.1 in · 2,670 mm	102.2 in · 2,595 mm	—
Ground clearance declared	19.1 in · 484 mm	20.5 in · 520 mm	+7% Explorer 80 II (DT)
Turning radius, braked declared	12.6 ft · 3.85 m	9.6 ft · 2.94 m	+31% 845 XL (A)
Fuel tank declared	112.0 qt · 106.0 L	116.2 qt · 110.0 L	—

Source

Source