Case-IH 845 XL (A) vs Hürlimann H-480 (A)

9 material differences · fewer than 12

Tractor one

Case-IH 845 XL (A)

1990–1996

No measured PTO figure

Tractor two

Hürlimann H-480 (A)

1979–1982

No measured PTO figure

Which should you choose?

We will not advise between these two machines, because they were not built in overlapping years (1990–1996; 1979–1982). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.

Field by field

9 material differences · 6 fields identical or within 5%, which is not counted as material

Case-IH 845 XL (A) and Hürlimann H-480 (A), field by field
Field845 XL (A)H-480 (A)Gap
Engine
Engine power, claimed claimed78.9 hp80.9 hp
Engine declaredIH D-268Hürlimann H-1104/7differs
Displacement declared4.39 L4.56 L
Maximum torque declared218 lb·ft · 296 N·m232 lb·ft · 315 N·m+6% H-480 (A)
Transmission
Top speed declared18.6 mph · 30 km/h15.5 mph · 25 km/h+20% 845 XL (A)
Clutch declaredDry SAME double clutch
Hydraulics & hitch
Pump flow declared8.6 gpm · 32.6 L/min9.2 gpm · 34.8 L/min+7% H-480 (A)
Three-point lift at ends declared6,945 lb · 3,150 kg4,233 lb · 1,920 kg+64% 845 XL (A)
Rear PTO speeds declared540/1000 rpm540/1000 rpm
Weight & dimensions
Unladen weight declared8,069 lb · 3,660 kg6,722 lb · 3,049 kg+20% 845 XL (A)
Maximum permissible mass declared12,787 lb · 5,800 kg
Wheelbase declared94.1 in · 2,390 mm92.1 in · 2,340 mm
Length declared144.9 in · 3,680 mm156.7 in · 3,980 mm+8% H-480 (A)
Width declared80.7 in · 2,050 mm76.8 in · 1,950 mm
Height declared105.1 in · 2,670 mm107.1 in · 2,720 mm
Ground clearance declared19.1 in · 484 mm15.7 in · 400 mm+21% 845 XL (A)
Turning radius, braked declared12.6 ft · 3.85 m
Fuel tank declared112.0 qt · 106.0 L100.4 qt · 95.0 L+12% 845 XL (A)

Case-IH 845 XL (A) sources

Source
  • Source: Traktorenlexikon, “Case-IH 845XL”

Hürlimann H-480 (A) sources

Source
  • Source: Traktorenlexikon, “Hürlimann H 480”