9 material differences · fewer than 12

Tractor oneCase-IH 845 XL (A)1990–1996No measured PTO figureTractor twoHürlimann H-478 "Prestige"1989–1998No measured PTO figure

Which should you choose?

Read our verdict on the 845 XL (A) and the H-478 "Prestige" → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 6 fields identical or within 5%, which is not counted as material

Case-IH 845 XL (A) and Hürlimann H-478 "Prestige", field by field
Field	845 XL (A)	H-478 "Prestige"	Gap
Engine
Engine power, claimed claimed	78.9 hp	78.9 hp	—
Engine declared	IH D-268	Hürlimann H-1000.4 W-1	differs
Displacement declared	4.39 L	4.00 L	+10% 845 XL (A)
Maximum torque declared	218 lb·ft · 296 N·m	193 lb·ft · 261 N·m	+13% 845 XL (A)
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	—	Pedal-operated dry SLH single-disc clutch as driving clutch	—
Hydraulics & hitch
Hydraulic control declared	—	Load sensing	—
Pump flow declared	8.6 gpm · 32.6 L/min	10.7 gpm · 40.5 L/min	+24% H-478 "Prestige"
Pressure declared	—	3,046 psi · 210 bar	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	8,069 lb · 3,660 kg	7,485 lb · 3,395 kg	+8% 845 XL (A)
Maximum permissible mass declared	12,787 lb · 5,800 kg	—	—
Wheelbase declared	94.1 in · 2,390 mm	91.3 in · 2,320 mm	—
Length declared	144.9 in · 3,680 mm	155.9 in · 3,960 mm	+8% H-478 "Prestige"
Width declared	80.7–88.6 in · 2,050–2,250 mm	82.3–105.9 in · 2,090–2,690 mm	differs
Height, over the cab declared	105.1 in · 2,670 mm	102.4 in · 2,600 mm	—
Ground clearance declared	19.1 in · 484 mm	18.5 in · 470 mm	—
Turning radius, braked declared	12.6 ft · 3.85 m	16.2 ft · 4.95 m	+29% H-478 "Prestige"
Fuel tank declared	112.0 qt · 106.0 L	116.2 qt · 110.0 L	—

Source

Source