Case-IH 845 XL (A) vs Case-IH C 70

13 material differences

Tractor one

1990–1996

No measured PTO figure

Tractor two

1992–1997

No measured PTO figure

Which should you choose?

Read our verdict on the 845 XL (A) and the C 70 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 2 fields identical or within 5%, which is not counted as material

Case-IH 845 XL (A) and Case-IH C 70, field by field
Field	845 XL (A)	C 70	Gap
Engine
Engine power, claimed claimed	78.9 hp	69.1 hp	+14% 845 XL (A)
Engine declared	IH D-268	Steyr WD 301.87	differs
Displacement declared	4.39 L	3.12 L	+41% 845 XL (A)
Maximum torque declared	218 lb·ft · 296 N·m	198 lb·ft · 268 N·m	+10% 845 XL (A)
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	—	Dry Fichtel & Sachs double clutch	—
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	8.6 gpm · 32.6 L/min	11.5 gpm · 43.5 L/min	+33% C 70
Pressure declared	—	3,481 psi · 240 bar	—
Three-point lift at ends declared	6,945 lb · 3,150 kg	5,181 lb · 2,350 kg	+34% 845 XL (A)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	8,069 lb · 3,660 kg	6,746 lb · 3,060 kg	+20% 845 XL (A)
Maximum permissible mass declared	12,787 lb · 5,800 kg	9,921 lb · 4,500 kg	+29% 845 XL (A)
Wheelbase declared	94.1 in · 2,390 mm	87.8 in · 2,229 mm	+7% 845 XL (A)
Length declared	144.9 in · 3,680 mm	149.8 in · 3,805 mm	—
Width declared	80.7 in · 2,050 mm	76.6 in · 1,945 mm	+5% 845 XL (A)
Height declared	105.1 in · 2,670 mm	95.5 in · 2,425 mm	+10% 845 XL (A)
Ground clearance declared	19.1 in · 484 mm	15.4 in · 390 mm	+24% 845 XL (A)
Turning radius, braked declared	12.6 ft · 3.85 m	—	—
Fuel tank declared	112.0 qt · 106.0 L	66.6 qt · 63.0 L	+68% 845 XL (A)

Source

Source