Case-IH 7250 Magnum vs John Deere 8230

10 material differences · fewer than 12

Tractor one

1994–1997

No measured PTO figure

Tractor two

2006–2009

No measured PTO figure

Which should you choose?

Read our verdict on the 7250 Magnum and the 8230 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 5 fields identical or within 5%, which is not counted as material

Case-IH 7250 Magnum and John Deere 8230, field by field
Field	7250 Magnum	8230	Gap
Engine
Engine power, claimed claimed	245.5 hp	236.8 hp	—
Engine declared	CUMMINS 6 TA-830	John Deere PowerTech-Plus 6.090 HRW-02	differs
Displacement declared	8.27 L	8.98 L	+9% 8230
Maximum torque declared	717 lb·ft · 972 N·m	740 lb·ft · 1,003 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	24.9–31.1 mph · 40–50 km/h	differs
Clutch declared	Case-IH multi-plate clutch running in oil bath	—	—
Hydraulics & hitch
Hydraulic centre declared	—	Closed centre	—
Hydraulic control declared	—	Load sensing	—
Pump flow declared	28.9 gpm · 109.4 L/min	—	—
Pressure declared	2,451 psi · 169 bar	—	—
Three-point lift at ends declared	20,637 lb · 9,361 kg	23,783 lb · 10,788 kg	+15% 8230
Rear PTO speeds declared	1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	18,140 lb · 8,228 kg	23,307 lb · 10,572 kg	+28% 8230
Maximum permissible mass declared	25,519 lb · 11,575 kg	30,865 lb · 14,000 kg	+21% 8230
Wheelbase declared	118.3 in · 3,006 mm	120.1 in · 3,050 mm	—
Length declared	200.4 in · 5,090 mm	233.8 in · 5,938 mm	+17% 8230
Width declared	120.0 in · 3,048 mm	118.6 in · 3,012 mm	—
Height declared	121.1 in · 3,077 mm	124.2 in · 3,155 mm	—
Ground clearance declared	19.3 in · 489 mm	13.2 in · 336 mm	+46% 7250 Magnum
Fuel tank declared	379.4 qt · 359.0 L	720.0 qt · 681.4 L	+90% 8230

Source

Source