Case-IH 7240 Magnum or New Holland-Fiat G 210?

Which should you choose?

On performance, every comparable figure that differs favours the New Holland-Fiat G 210: three-point lift and maximum permissible mass. On features, the Case-IH 7240 Magnum is ahead on forward gears.

  • The New Holland-Fiat G 210 suits loader and hydraulic implement work better on this data: 27% (1,963 kg / 4,328 lb) more three-point lift.
  • The New Holland-Fiat G 210 suits road haulage better on this data: 18% (2,075 kg / 4,575 lb) more maximum permissible mass.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Case-IH 7240 Magnum and New Holland-Fiat G 210, with the call on each
Question7240 MagnumG 210Call
Which puts more power through the PTO shaft?146.6 kW (196.6 hp)Traktorenlexikon, “Case-IH 7240”149.3 kW (200.2 hp)Traktorenlexikon, “Fiatagri G210”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the 7240 Magnum and the G 210.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the 7240 Magnum and the G 210.
Which pumps more oil for implements?109.8 L/min (29.0 gpm)Traktorenlexikon, “Case-IH 7240”103.9 L/min (27.4 gpm)Traktorenlexikon, “Fiatagri G210”EvenEven on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
Which lifts more on the three-point hitch?7,148 kg (15,759 lb)Traktorenlexikon, “Case-IH 7240”9,111 kg (20,086 lb)Traktorenlexikon, “Fiatagri G210”AheadThe New Holland-Fiat G 210 has 27% more lift (1,963 kg / 4,328 lb) than the Case-IH 7240 Magnum (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?8,097 kg (17,851 lb)Traktorenlexikon, “Case-IH 7240”9,000 kg (19,842 lb)Traktorenlexikon, “Fiatagri G210”Ahead (a fact, not an advantage)The New Holland-Fiat G 210 is 11% heavier (903 kg / 1,991 lb) than the Case-IH 7240 Magnum (both unladen weight, as stated by the source).
Which may carry more ballast and load?11,575 kg (25,519 lb)Traktorenlexikon, “Case-IH 7240”13,650 kg (30,093 lb)Traktorenlexikon, “Fiatagri G210”AheadThe New Holland-Fiat G 210 has 18% higher maximum permissible mass (2,075 kg / 4,575 lb) than the Case-IH 7240 Magnum (both maximum permissible mass, as stated by the source).
Which has the wider choice of gears?24Traktorenlexikon, “Case-IH 7240”16 to 18Traktorenlexikon, “Fiatagri G210”AheadThe Case-IH 7240 Magnum has 33% more forward gears (6 gears) than the New Holland-Fiat G 210 (both forward gears, as stated by the source).
Which offers a creeper range?YesTraktorenlexikon, “Case-IH 7240”No figureNo call on a creeper range: not stated for the G 210.
Which is faster on the road?30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Case-IH 7240”30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Fiatagri G210”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?1000 rpmTraktorenlexikon, “Case-IH 7240”1000 rpmTraktorenlexikon, “Fiatagri G210”EvenEven on PTO speeds: the same speeds (1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Case-IH 7240”independentTraktorenlexikon, “Fiatagri G210”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?4WDTraktorenlexikon, “Case-IH 7240”4WDTraktorenlexikon, “Fiatagri G210”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1994–19971993–2003EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The New Holland-Fiat G 210 has 27% more lift (1,963 kg / 4,328 lb) than the Case-IH 7240 Magnum (both lift at the hitch ends, as stated by the source).
  • The New Holland-Fiat G 210 is 11% heavier (903 kg / 1,991 lb) than the Case-IH 7240 Magnum (both unladen weight, as stated by the source).
  • The New Holland-Fiat G 210 has 18% higher maximum permissible mass (2,075 kg / 4,575 lb) than the Case-IH 7240 Magnum (both maximum permissible mass, as stated by the source).
  • The Case-IH 7240 Magnum has 33% more forward gears (6 gears) than the New Holland-Fiat G 210 (both forward gears, as stated by the source).
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (1000 rpm).
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power and a creeper range.

← Every figure for both machines, side by side, with sources