Case-IH 7240 Magnum vs New Holland-Fiat G 210

11 material differences · fewer than 12

Tractor one

1994–1997

No measured PTO figure

Tractor two

1993–2003

No measured PTO figure

Which should you choose?

Read our verdict on the 7240 Magnum and the G 210 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 6 fields identical or within 5%, which is not counted as material

Case-IH 7240 Magnum and New Holland-Fiat G 210, field by field
Field	7240 Magnum	G 210	Gap
Engine
Engine power, claimed claimed	230.8 hp	207.3 hp	+11% 7240 Magnum
Engine declared	CUMMINS 6 TA-830	New Holland VA 456 TC/AC	differs
Displacement declared	8.27 L	7.49 L	+10% 7240 Magnum
Maximum torque declared	687 lb·ft · 932 N·m	696 lb·ft · 943 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Case-IH multi-disc clutch running in oil bath	Electro-hydraulically operated Funk multi-disc clutch running in an oil bath	differs
Hydraulics & hitch
Pump flow declared	29.0 gpm · 109.8 L/min	27.4 gpm · 103.9 L/min	+6% 7240 Magnum
Pressure declared	2,451 psi · 169 bar	2,799 psi · 193 bar	+14% G 210
Three-point lift at ends declared	15,759 lb · 7,148 kg	20,086 lb · 9,111 kg	+27% G 210
Rear PTO speeds declared	1000 rpm	1000 rpm	—
Weight & dimensions
Unladen weight declared	17,851 lb · 8,097 kg	19,842 lb · 9,000 kg	+11% G 210
Maximum permissible mass declared	25,519 lb · 11,575 kg	30,093 lb · 13,650 kg	+18% G 210
Wheelbase declared	118.3 in · 3,006 mm	122.6 in · 3,115 mm	—
Length declared	200.4 in · 5,090 mm	230.3 in · 5,850 mm	+15% G 210
Width declared	120.0 in · 3,048 mm	100.8 in · 2,560 mm	+19% 7240 Magnum
Height declared	121.1 in · 3,077 mm	122.0 in · 3,100 mm	—
Ground clearance declared	19.3 in · 489 mm	20.0 in · 509 mm	—
Turning radius, braked declared	—	14.4 ft · 4.40 m	—
Fuel tank declared	379.4 qt · 359.0 L	439.6 qt · 416.0 L	+16% G 210

Source

Source