Case-IH 7130 Magnum vs VALMET 8750

16 material differences

Tractor one

1988–1993

No measured PTO figure

Tractor two

1995–2000

No measured PTO figure

Which should you choose?

Read our verdict on the 7130 Magnum and the 8750 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

16 material differences · 1 fields identical or within 5%, which is not counted as material

Case-IH 7130 Magnum and VALMET 8750, field by field
Field	7130 Magnum	8750	Gap
Engine
Engine power, claimed claimed	202.2 hp	—	—
Engine declared	CUMMINS 6 T-830	VALMET 634 DS (E)	differs
Displacement declared	8.27 L	7.37 L	+12% 7130 Magnum
Maximum torque declared	541 lb·ft · 733 N·m	510 lb·ft · 691 N·m	+6% 7130 Magnum
Transmission
Top speed declared	19.9 mph · 32 km/h	24.9–31.1 mph · 40–50 km/h	differs
Clutch declared	Oil-immersed multi-disc clutch	pedal-operated dry single-disc clutch	differs
Hydraulics & hitch
Pump flow declared	28.6 gpm · 108.1 L/min	19.6 gpm · 74.2 L/min	+46% 7130 Magnum
Pressure declared	2,654 psi · 183 bar	3,046 psi · 210 bar	+15% 8750
Three-point lift at ends declared	12,141 lb · 5,507 kg	15,212 lb · 6,900 kg	+25% 8750
Rear PTO speeds declared	540/1000 rpm	1000 rpm	differs
Weight & dimensions
Unladen weight declared	17,090 lb · 7,752 kg	11,817 lb · 5,360 kg	+45% 7130 Magnum
Maximum permissible mass declared	25,519 lb · 11,575 kg	17,637 lb · 8,000 kg	+45% 7130 Magnum
Wheelbase declared	118.3 in · 3,006 mm	108.2 in · 2,748 mm	+9% 7130 Magnum
Length declared	199.1 in · 5,056 mm	194.4 in · 4,937 mm	—
Width declared	114.0 in · 2,896 mm	85.7 in · 2,178 mm	+33% 7130 Magnum
Height declared	118.8 in · 3,017 mm	109.6 in · 2,785 mm	+8% 7130 Magnum
Ground clearance declared	17.3 in · 439 mm	21.7 in · 550 mm	+25% 8750
Turning radius, braked declared	14.6 ft · 4.45 m	—	—
Fuel tank declared	311.7–379.4 qt · 295.0–359.0 L	174.4 qt · 165.0 L	differs

Source

Source