• Rigid chassis
  • WhichTractor size: High-power
  • Not independently tested
  • 1995–2000

It sits on the standard-size/high-power boundary, so either size is a fair description. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

VALMET 8750 Full specifications

VALMET 634 DS (E) six-cylinder diesel.

Weight
11,817 lb
3-point lift
15,212 lb
Hyd. flow
19.6 gpm
Top speed
24.9–31.1 mph

VALMET 8750 specs: key facts

  • The VALMET 8750 was built from 1995 to 2000.

  • The VALMET 8750 is four-wheel drive (4WD).

  • The VALMET 8750 has a VALMET 634 DS (E) engine, a 6-cylinder 7.37 L diesel unit.

  • The VALMET 8750 weighs 5,360 kg (11,817 lb) unladen.

  • The VALMET 8750 has an independent rear PTO running at 1000 rpm.

  • The three-point hitch of the VALMET 8750 lifts 6,900 kg (15,212 lb) at the lower-link ends.

  • The hydraulic pump of the VALMET 8750 delivers 74.2 L/min (19.6 gpm).

Source · Traktorenlexikon, “Valmet Mega-8750”

VALMET 8750 tractor
Photo: Antti Leppänen, CC BY 4.0 via Wikimedia Commons · Wrong photo?

How much horsepower does an 8750 have?

No sourced power figure for the 8750 is on record yet.

What engine is in an 8750?

An 8750 has a VALMET 634 DS (E), a 6-cylinder 7.37 L diesel engine.

Engine — 8750 engine specifications
Make & modelVALMET 634 DS (E)
Cylinders6, liquid-cooled
Displacement449.4 ci · 7.37 L
Max torque510 lb·ft · 691 N·m @ 1,202 rpm
Injectiondirect injection
Electrical system12 V

Source · Traktorenlexikon, “Valmet Mega-8750”

How much will an 8750 lift, and what is its hydraulic flow?

An 8750 lifts 15,212 lb (6,900 kg) at the lower-link ends of its Category 3 three-point hitch.

Hydraulics & PTO — 8750 hydraulics and PTO specifications
Pump flow19.6 gpm · 74.2 L/min
Pressure3,046 psi · 210 bar
Hitch categoryCategory 3
Lift at ends15,212 lb · 6,900 kg
Rear PTOIndependent, engine-driven, 1000 rpmEngages under load
PTO shaft1 3/8"- 21 splines

Source · Traktorenlexikon, “Valmet Mega-8750”

What transmission does an 8750 have?

Transmission specifications for the 8750 are below.

Transmission — 8750 transmission specifications
Clutchpedal-operated dry single-disc clutch
Brakespedal-operated wet multi-disc brake acting on differential side shafts
Top speed24.9–31.1 mph · 40–50 km/hthe article lists alternatives

Source · Traktorenlexikon, “Valmet Mega-8750”

How much does an 8750 weigh?

An 8750 weighs 11,817 lb (5,360 kg) unladen.

Weights & dimensions — 8750 weights and dimensions
Unladen weight11,817 lb · 5,360 kg
Maximum permissible mass17,637 lb · 8,000 kg
Wheelbase108.2 in · 2,748 mm2,558
Length194.4 in · 4,937 mm
Width85.7 in · 2,178 mm
Height109.6 in · 2,785 mm
Ground clearance21.7 in · 550 mm
Front track59.6–77.6 in · 1,515–1,970 mm
Rear track67.5–83.3 in · 1,715–2,115 mm

Source · Traktorenlexikon, “Valmet Mega-8750”

Which tractors compare with an 8750?

Within 10% of its 171.2 hp at the PTO (claimed), the same type, and first built within 15 years of it.

Everything else people ask

Is an 8750 two-wheel drive or four-wheel drive?

The VALMET 8750 is four-wheel drive (4WD).

What PTO does an 8750 have?

An 8750 has a independent 1000 rpm rear PTO on a 1 3/8"- 21 splines shaft.

Where this page comes from

Compiled from Traktorenlexikon, “Valmet Mega-8750”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Valmet Mega-8750CC BY-SA 4.0, WIKIBOOKS-TL-116512 · revision 1036853. Wikibooks contributors (Traktorenlexikon). Original document