Case-IH 5230 (DT) vs VALMET 903/903-4

15 material differences

Tractor one

1989–1997

No measured PTO figure

Tractor two

1979–1983

No measured PTO figure

Which should you choose?

Read our verdict on the 5230 (DT) and the 903/903-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

15 material differences · 0 fields identical or within 5%, which is not counted as material

Case-IH 5230 (DT) and VALMET 903/903-4, field by field
Field	5230 (DT)	903/903-4	Gap
Engine
Engine power, claimed claimed	97.6 hp	92.7 hp	+5% 5230 (DT)
Engine declared	CUMMINS NCE 6-590	VALMET 411 CS	differs
Displacement declared	5.88 L	4.40 L	+34% 5230 (DT)
Maximum torque declared	262 lb·ft · 355 N·m	236 lb·ft · 320 N·m	+11% 5230 (DT)
Transmission
Top speed declared	15.5–24.9 mph · 25–40 km/h	18.6 mph · 30 km/h	differs
Hydraulics & hitch
Pump flow declared	19.9 gpm · 75.3 L/min	11.4 gpm · 43.0 L/min	+75% 5230 (DT)
Three-point lift at ends declared	9,870 lb · 4,477 kg	6,393 lb · 2,900 kg	+54% 5230 (DT)
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	9,877 lb · 4,480 kg	8,047 lb · 3,650 kg	+23% 5230 (DT)
Wheelbase declared	103.7 in · 2,634 mm	91.7 in · 2,330 mm	+13% 5230 (DT)
Length declared	172.8 in · 4,390 mm	153.7 in · 3,905 mm	+12% 5230 (DT)
Width declared	96.0 in · 2,438 mm	77.6 in · 1,972 mm	+24% 5230 (DT)
Height declared	106.1 in · 2,695 mm	98.4 in · 2,499 mm	+8% 5230 (DT)
Ground clearance declared	22.1 in · 561 mm	18.1 in · 460 mm	+22% 5230 (DT)
Turning radius, braked declared	13.5 ft · 4.13 m	12.5 ft · 3.82 m	+8% 5230 (DT)
Fuel tank declared	179.6 qt · 170.0 L	95.1 qt · 90.0 L	+89% 5230 (DT)

Source

Source