Case-IH 5230 (DT) vs Landini 10.000 (DT)

8 material differences · fewer than 12

Tractor one

1989–1997

No measured PTO figure

Tractor two

1978–1993

No measured PTO figure

Which should you choose?

Read our verdict on the 5230 (DT) and the 10.000 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 7 fields identical or within 5%, which is not counted as material

Case-IH 5230 (DT) and Landini 10.000 (DT), field by field
Field	5230 (DT)	10.000 (DT)	Gap
Engine
Engine power, claimed claimed	97.6 hp	98.6 hp	—
Engine declared	CUMMINS NCE 6-590	Perkins TW 31087 U (A. 6.354.4/A. 6.354.4 HTR)	differs
Displacement declared	5.88 L	5.79 L	—
Maximum torque declared	262 lb·ft · 355 N·m	289 lb·ft · 392 N·m	+10% 10.000 (DT)
Transmission
Top speed declared	15.5–24.9 mph · 25–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	—	Pedal-operated, dry and air-cooled double clutch	—
Hydraulics & hitch
Pump flow declared	19.9 gpm · 75.3 L/min	12.3 gpm · 46.5 L/min	+62% 5230 (DT)
Three-point lift at ends declared	9,870 lb · 4,477 kg	6,746 lb · 3,060 kg	+46% 5230 (DT)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	9,877 lb · 4,480 kg	9,976 lb · 4,525 kg	—
Wheelbase declared	103.7 in · 2,634 mm	104.7 in · 2,660 mm	—
Length declared	172.8 in · 4,390 mm	171.3 in · 4,350 mm	—
Width declared	96.0 in · 2,438 mm	83.9 in · 2,130 mm	+14% 5230 (DT)
Height declared	106.1 in · 2,695 mm	113.2 in · 2,875 mm	+7% 10.000 (DT)
Ground clearance declared	22.1 in · 561 mm	16.9 in · 430 mm	+30% 5230 (DT)
Turning radius, braked declared	13.5 ft · 4.13 m	—	—
Fuel tank declared	179.6 qt · 170.0 L	179.6 qt · 170.0 L	—

Source

Source