Case-IH 5230 (DT) vs Fiat 1000 Super (TD)

9 material differences · fewer than 12

Tractor one

1989–1997

No measured PTO figure

Tractor two

1976–1979

No measured PTO figure

Which should you choose?

Read our verdict on the 5230 (DT) and the 1000 Super (TD) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 5 fields identical or within 5%, which is not counted as material

Case-IH 5230 (DT) and Fiat 1000 Super (TD), field by field
Field	5230 (DT)	1000 Super (TD)	Gap
Engine
Engine power, claimed claimed	97.6 hp	108.5 hp	+11% 1000 Super (TD)
Engine declared	CUMMINS NCE 6-590	FIAT-IVECO 8065.04.207	differs
Displacement declared	5.88 L	5.50 L	+7% 5230 (DT)
Maximum torque declared	262 lb·ft · 355 N·m	268 lb·ft · 364 N·m	—
Transmission
Top speed declared	15.5–24.9 mph · 25–40 km/h	15.5 mph · 25 km/h	differs
Hydraulics & hitch
Pump flow declared	19.9 gpm · 75.3 L/min	—	—
Pressure declared	—	2,843 psi · 196 bar	—
Three-point lift at ends declared	9,870 lb · 4,477 kg	7,055 lb · 3,200 kg	+40% 5230 (DT)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	9,877 lb · 4,480 kg	7,981 lb · 3,620 kg	+24% 5230 (DT)
Maximum permissible mass declared	—	14,065 lb · 6,380 kg	—
Wheelbase declared	103.7 in · 2,634 mm	97.6 in · 2,480 mm	+6% 5230 (DT)
Length declared	172.8 in · 4,390 mm	164.6 in · 4,180 mm	—
Width declared	96.0 in · 2,438 mm	76.0 in · 1,930 mm	+26% 5230 (DT)
Height declared	106.1 in · 2,695 mm	93.3 in · 2,370 mm	+14% 5230 (DT)
Ground clearance declared	22.1 in · 561 mm	22.8 in · 580 mm	—
Turning radius, braked declared	13.5 ft · 4.13 m	13.1 ft · 4.00 m	—
Fuel tank declared	179.6 qt · 170.0 L	124.7 qt · 118.0 L	+44% 5230 (DT)

Source

Source