11 material differences · fewer than 12

Tractor oneCase-IH 5220 (DT)1989–1997No measured PTO figureTractor twoZETOR 9520/95401992–1999No measured PTO figure

Which should you choose?

Read our verdict on the 5220 (DT) and the 9520/9540 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 6 fields identical or within 5%, which is not counted as material

Case-IH 5220 (DT) and ZETOR 9520/9540, field by field
Field	5220 (DT)	9520/9540	Gap
Engine
Engine power, claimed claimed	92.7 hp	92.7 hp	—
Engine declared	CUMMINS NCE 4 T-390	ZBROJOVKA Z-1001	differs
Displacement declared	3.92 L	4.16 L	+6% 9520/9540
Maximum torque declared	237 lb·ft · 321 N·m	275 lb·ft · 373 N·m	+16% 9520/9540
Transmission
Top speed declared	15.5–24.9 mph · 25–40 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	—	Pedal-operated dry single-disc clutch	—
Hydraulics & hitch
Hydraulic control declared	Load sensing	—	—
Pump flow declared	19.6 gpm · 74.3 L/min	11.3 gpm · 42.9 L/min	+73% 5220 (DT)
Pressure declared	3,191 psi · 220 bar	3,046 psi · 210 bar	—
Three-point lift, at the coupling points declared	10,207 lb · 4,630 kg	10,207 lb · 4,630 kg	—
Rear PTO speeds declared	635/1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	8,818 lb · 4,000 kg	8,157 lb · 3,700 kg	+8% 5220 (DT)
Maximum permissible mass declared	16,535 lb · 7,500 kg	16,535 lb · 7,500 kg	—
Wheelbase declared	107.5 in · 2,730 mm	93.5 in · 2,375 mm	+15% 5220 (DT)
Length declared	163.0 in · 4,140 mm	165.0 in · 4,190 mm	—
Width declared	79.7 in · 2,025 mm	76.8–88.6 in · 1,950–2,250 mm	differs
Height, over the cab declared	105.2 in · 2,672 mm	104.1 in · 2,645 mm	—
Ground clearance declared	22.1 in · 561 mm	13.9 in · 352 mm	+59% 5220 (DT)
Turning radius, braked declared	—	12.2 ft · 3.73 m	—
Fuel tank declared	179.6 qt · 170.0 L	111.0 qt · 105.0 L	+62% 5220 (DT)

Source

Source