8 material differences · fewer than 12
Tractor oneCase-IH 5140 Maxxum1989–1997No measured PTO figureTractor twoVALMET 80501995–2004No measured PTO figure
Which should you choose?
Read our verdict on the 5140 Maxxum and the 8050 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | 5140 Maxxum | 8050 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 108.5 hp | 108.5 hp | — |
| Engine declared | CUMMINS NCE 6 T-590 | VALMET 620 DSR or 620 DSRE | differs |
| Displacement declared | 5.88 L | 6.59 L | +12% 8050 |
| Maximum torque declared | 315 lb·ft · 427 N·m | 340 lb·ft · 461 N·m | +8% 8050 |
| Transmission | |||
| Top speed declared | 15.5–24.9 mph · 25–40 km/h | 18.6–31.1 mph · 30–50 km/h | differs |
| Clutch declared | — | Pedal-operated dry Fichtel & Sachs single-disc clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 19.2 gpm · 72.6 L/min | 18.8 gpm · 71.0 L/min | — |
| Pressure declared | 3,191 psi · 220 bar | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 12,114 lb · 5,495 kg | 10,450 lb · 4,740 kg | +16% 5140 Maxxum |
| Maximum permissible mass declared | 17,196 lb · 7,800 kg | 16,535 lb · 7,500 kg | — |
| Wheelbase declared | 101.8 in · 2,585 mm | 100.7 in · 2,558 mm | — |
| Length declared | 175.3 in · 4,453 mm | 187.3 in · 4,757 mm | +7% 8050 |
| Width declared | 86.8 in · 2,204 mm | 84.8–104.7 in · 2,155–2,660 mm | differs |
| Ground clearance declared | 18.3 in · 465 mm | 18.7 in · 475 mm | — |
| Fuel tank declared | 142.7 qt · 135.0 L | 174.4 qt · 165.0 L | +22% 8050 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Case-IH 5140 Maxxum sources
- Source: Traktorenlexikon, “Case-IH 5140”
VALMET 8050 sources
- Source: Traktorenlexikon, “Valmet Mega-8050”