8 material differences · fewer than 12
Tractor oneCase-IH 5130 Maxxum1989–1997No measured PTO figureTractor twoDeutz-Fahr DX 6.101983–1990No measured PTO figure
Which should you choose?
Read our verdict on the 5130 Maxxum and the DX 6.10 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | 5130 Maxxum | DX 6.10 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 98.6 hp | 98.2 hp | — |
| Engine declared | CUMMINS NCE 6-590 | KHD F6L 912.74 | differs |
| Displacement declared | 5.88 L | 5.65 L | — |
| Maximum torque declared | — | 263 lb·ft · 356 N·m | — |
| Transmission | |||
| Top speed declared | 15.5–24.9 mph · 25–40 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 19.1 gpm · 72.4 L/min | 14.7 gpm · 55.6 L/min | +30% 5130 Maxxum |
| Pressure declared | 3,191 psi · 220 bar | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 11,100 lb · 5,035 kg | 10,472 lb · 4,750 kg | +6% 5130 Maxxum |
| Maximum permissible mass declared | 17,196 lb · 7,800 kg | 14,991 lb · 6,800 kg | +15% 5130 Maxxum |
| Wheelbase declared | 101.8 in · 2,585 mm | 106.4 in · 2,703 mm | — |
| Length declared | 175.3 in · 4,453 mm | 179.1 in · 4,550 mm | — |
| Width declared | 86.8 in · 2,204 mm | 90.7 in · 2,304 mm | — |
| Ground clearance declared | 18.0 in · 457 mm | 20.1 in · 510 mm | +12% DX 6.10 |
| Turning radius, braked declared | 13.5 ft · 4.13 m | 15.9 ft · 4.86 m | +18% DX 6.10 |
| Fuel tank declared | 142.7 qt · 135.0 L | 126.8 qt · 120 L | +13% 5130 Maxxum |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Case-IH 5130 Maxxum sources
- Source: Traktorenlexikon, “Case-IH 5130”
Deutz-Fahr DX 6.10 sources
- Source: Traktorenlexikon, “Deutz-Fahr DX 6.10”