Case-IH 385 (DT) vs UZINA TRACTORUL 420 (DT)

12 material differences

Tractor one

1985–1990

No measured PTO figure

Tractor two

1974–1981

No measured PTO figure

Which should you choose?

Read our verdict on the 385 (DT) and the 420 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 0 fields identical or within 5%, which is not counted as material

Case-IH 385 (DT) and UZINA TRACTORUL 420 (DT), field by field
Field	385 (DT)	420 (DT)	Gap
Engine
Engine power, claimed claimed	45.3 hp	41.3 hp	+10% 385 (DT)
Engine declared	IHC D-155	UTB D-115	differs
Displacement declared	2.54 L	2.34 L	+8% 385 (DT)
Maximum torque declared	100 lb·ft · 135 N·m	108 lb·ft · 147 N·m	+9% 420 (DT)
Transmission
Top speed declared	18.6 mph · 30 km/h	15.5 mph · 25 km/h	+20% 385 (DT)
Clutch declared	Pedal-operated dry Laycock single-plate drive clutch	—	—
Hydraulics & hitch
Pump flow declared	—	4.2 gpm · 16.0 L/min	—
Pressure declared	—	2,973 psi · 205 bar	—
Three-point lift at ends declared	3,439 lb · 1,560 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	5,692 lb · 2,582 kg	3,616 lb · 1,640 kg	+57% 385 (DT)
Wheelbase declared	79.0 in · 2,007 mm	74.8 in · 1,900 mm	+6% 385 (DT)
Length declared	139.2 in · 3,535 mm	122.4 in · 3,110 mm	+14% 385 (DT)
Width declared	72.4 in · 1,840 mm	68.1 in · 1,730 mm	+6% 385 (DT)
Height declared	93.7 in · 2,380 mm	86.6 in · 2,200 mm	+8% 385 (DT)
Ground clearance declared	8.5 in · 215 mm	20.9 in · 530 mm	+147% 420 (DT)
Turning radius, braked declared	—	10.6 ft · 3.22 m	—
Fuel tank declared	80.0 qt · 75.7 L	57.1 qt · 54.0 L	+40% 385 (DT)

Source

Source