Case-IH 3210 vs Case-IH 385 (DT)
5 material differences · fewer than 12
Which should you choose?
Read our verdict on the 3210 and the 385 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
5 material differences · 10 fields identical or within 5%, which is not counted as material
| Field | 3210 | 385 (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 44.4 hp | 45.3 hp | — |
| Engine declared | IHC D-155 | IHC D-155 | — |
| Displacement declared | 2.54 L | 2.54 L | — |
| Maximum torque declared | 117 lb·ft · 159 N·m | 100 lb·ft · 135 N·m | +18% 3210 |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | pedal-operated dry Laycock single-disc clutch | Pedal-operated dry Laycock single-plate drive clutch | differs |
| Hydraulics & hitch | |||
| Three-point lift at ends declared | 5,401 lb · 2,450 kg | 3,439 lb · 1,560 kg | +57% 3210 |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 5,997 lb · 2,720 kg | 5,692 lb · 2,582 kg | +5% 3210 |
| Wheelbase declared | 79.0 in · 2,007 mm | 79.0 in · 2,007 mm | — |
| Length declared | 139.2 in · 3,535 mm | 139.2 in · 3,535 mm | — |
| Width declared | 72.4 in · 1,840 mm | 72.4 in · 1,840 mm | — |
| Height declared | 93.5 in · 2,376 mm | 93.7 in · 2,380 mm | — |
| Ground clearance declared | 8.5 in · 215 mm | 8.5 in · 215 mm | — |
| Turning radius, braked declared | 11.5 ft · 3.50 m | — | — |
| Fuel tank declared | 118.3 qt · 112.0 L | 80.0 qt · 75.7 L | +48% 3210 |
Case-IH 3210 sources
Source
- Source: Traktorenlexikon, “Case-IH 3210”
Case-IH 385 (DT) sources
Source
- Source: Traktorenlexikon, “Case-IH 385”
- Source: Traktorenlexikon, “Case-IH 3210”