7 material differences · fewer than 12

M)1988–2000No measured PTO figure

Which should you choose?

Read our verdict on the 2140 E/V (A) and the 6560 L (DT) TL 37 N/M (TL-37 DT/M) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

7 material differences · 7 fields identical or within 5%, which is not counted as material

Case-IH 2140 E/V (A) and Landini 6560 L (DT) TL 37 N/M (TL-37 DT/M), field by field
Field	2140 E/V (A)	6560 L (DT) TL 37 N/M (TL-37 DT/M)	Gap
Engine
Engine power, claimed claimed	64.1 hp	64.1 hp	—
Engine declared	SAME 1000.4 A/65	Perkins A 4.236	differs
Displacement declared	4.00 L	3.87 L	—
Maximum torque declared	172 lb·ft · 233 N·m	181 lb·ft · 245 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	—	Dry and air-cooled OMG double clutch	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	10.6 gpm · 40.0 L/min	11.2 gpm · 42.3 L/min	+6% 6560 L (DT) TL 37 N/M (TL-37 DT/M)
Pressure declared	—	2,756 psi · 190 bar	—
Rear PTO speeds declared	540/1000 rpm	540 rpm / 1000 rpm	differs
Weight & dimensions
Unladen weight declared	4,619 lb · 2,095 kg	5,004 lb · 2,270 kg	+8% 6560 L (DT) TL 37 N/M (TL-37 DT/M)
Wheelbase declared	83.1 in · 2,110 mm	81.5 in · 2,070 mm	—
Length declared	141.5 in · 3,594 mm	140.6 in · 3,570 mm	—
Width declared	54.0–78.5 in · 1,371–1,995 mm	65.7–87.4 in · 1,670–2,220 mm	differs
Height, over the roll bar declared	98.9 in · 2,512 mm	93.7 in · 2,380 mm	+6% 2140 E/V (A)
Ground clearance declared	14.4 in · 366 mm	16.5 in · 420 mm	+15% 6560 L (DT) TL 37 N/M (TL-37 DT/M)
Turning radius, braked declared	—	10.8 ft · 3.29 m	—
Fuel tank declared	63.4 qt · 60.0 L	65.5 qt · 62.0 L	—

Source

Source