5 material differences · fewer than 12
Tractor oneBührer Komfort 465 (A)1975–1978No measured PTO figureTractor twoDeutz (KHD) D 68061974–1980No measured PTO figure
Which should you choose?
Read our verdict on the Komfort 465 (A) and the D 6806 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
5 material differences · 8 fields identical or within 5%, which is not counted as material
| Field | Komfort 465 (A) | D 6806 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 64.1 hp | 66 hp | — |
| Engine declared | Perkins A 4.236 | KHD F4L 912 | differs |
| Displacement declared | 3.87 L | 3.77 L | — |
| Maximum torque declared | 187 lb·ft · 253 N·m | 177 lb·ft · 240 N·m | +5% Komfort 465 (A) |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 15.5 mph · 25 km/h | — |
| Clutch declared | — | Independent dry Fichtel & Sachs double clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 5.8 gpm · 22.0 L/min | 7.5 gpm · 28.3 L/min | +29% D 6806 |
| Pressure declared | 2,845 psi · 196 bar | 2,901 psi · 200 bar | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 5,710 lb · 2,590 kg | 6,085 lb · 2,760 kg | +7% D 6806 |
| Maximum permissible mass declared | — | 11,023 lb · 5,000 kg | — |
| Wheelbase declared | 84.7 in · 2,152 mm | 84.6 in · 2,150 mm | — |
| Length declared | 143.7 in · 3,650 mm | 146.1 in · 3,710 mm | — |
| Width declared | 72.6 in · 1,845 mm | 76.4 in · 1,940 mm | — |
| Ground clearance declared | 17.1 in · 435 mm | 19.7 in · 500 mm | +15% D 6806 |
| Turning radius, braked declared | — | 11.7 ft · 3.56 m | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Bührer Komfort 465 (A) sources
- Source: Traktorenlexikon, “Bührer 465/465A”
- Source: Traktorenlexikon, “Massey Ferguson MF 168 & MF 168A”
Deutz (KHD) D 6806 sources
- Source: Traktorenlexikon, “Deutz D 6806”
- Source: Traktorenlexikon, “Deutz D 6006”