8 material differences · fewer than 12

Tractor oneALLIS-CHALMERS FD-41962–1965No measured PTO figureTractor twoMASSEY-HARRIS 7441948–1953No measured PTO figure

Which should you choose?

Read our verdict on the FD-4 and the 744 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

8 material differences · 3 fields identical or within 5%, which is not counted as material

ALLIS-CHALMERS FD-4 and MASSEY-HARRIS 744, field by field
FieldFD-4744Gap
Engine
Engine power, claimed claimed41.4 hp41.4 hp—
Engine declaredVENDEUVRE 56PERKINS P-6differs
Displacement declared—4.73 L—
Transmission
Top speed declared12.4 mph · 20 km/h12.4 mph · 20 km/h—
Clutch declaredPedal operated dry two stage double clutchPedal-operated dry single-plate clutchdiffers
Hydraulics & hitch
Rear PTO speeds declared540/1000 rpm534 rpmdiffers
Weight & dimensions
Unladen weight declared4,057 lb · 1,840 kg5,115 lb · 2,320 kg+26% 744
Wheelbase declared84.6 in · 2,150 mm86.2 in · 2,190 mm—
Length declared120.1 in · 3,050 mm129.9 in · 3,300 mm+8% 744
Width declared66.1 in · 1,680 mm70.1 in · 1,780 mm+6% 744
Ground clearance declared18.5 in · 470 mm9.7 in · 247 mm+90% FD-4
Turning radius, braked declared—10.6 ft · 3.22 m—
Fuel tank declared63.4 qt · 60.0 L76.8 qt · 72.7 L+21% 744

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

ALLIS-CHALMERS FD-4 sources

Source
  • Source: Traktorenlexikon, “Allis-Chalmers FD 4”

MASSEY-HARRIS 744 sources

Source
  • Source: Traktorenlexikon, “Massey-Harris Massey-Harris 744”