ALLIS-CHALMERS FD-3 vs Fendt 1Z

11 material differences · fewer than 12

Tractor one

1962–1965

No measured PTO figure

Tractor two

1963–1967

No measured PTO figure

Which should you choose?

Read our verdict on the FD-3 and the 1Z → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 3 fields identical or within 5%, which is not counted as material

ALLIS-CHALMERS FD-3 and Fendt 1Z, field by field
Field	FD-3	1Z	Gap
Engine
Engine power, claimed claimed	24.7 hp	24.5 hp	—
Engine declared	VENDEUVRE 52	MWM AKD 112 Z	differs
Displacement declared	—	1.81 L	—
Maximum torque declared	53 lb·ft · 71.6 N·m	83 lb·ft · 113 N·m	+58% 1Z
Transmission
Top speed declared	12.4 mph · 20 km/h	12.4 mph · 20 km/h	—
Clutch declared	Pedal operated dry two stage double clutch	Single-disc dry clutch from Fichtel & Sachs	differs
Hydraulics & hitch
Pump flow declared	—	4.0 gpm · 15.0 L/min	—
Three-point lift at ends declared	1,764 lb · 800 kg	2,612 lb · 1,185 kg	+48% 1Z
Rear PTO speeds declared	540/1000 rpm	585 rpm	differs
Weight & dimensions
Unladen weight declared	3,153 lb · 1,430 kg	3,516 lb · 1,595 kg	+12% 1Z
Maximum permissible mass declared	—	4,497 lb · 2,040 kg	—
Wheelbase declared	76.8–80.7 in · 1,950–2,050 mm	73.5 in · 1,866 mm	differs
Length declared	112.2 in · 2,850 mm	123.6 in · 3,139 mm	+10% 1Z
Width declared	63.0 in · 1,600 mm	59.8 in · 1,518 mm	+5% FD-3
Height declared	51.2 in · 1,300 mm	58.3 in · 1,480 mm	+14% 1Z
Ground clearance declared	15.7 in · 400 mm	15.7 in · 400 mm	—
Turning radius, braked declared	—	10.1 ft · 3.07 m	—
Fuel tank declared	47.6 qt · 45.0 L	32.8 qt · 31.0 L	+45% FD-3

Source

Source