ALLIS-CHALMERS 220 Landhandler vs SOMECA 1380 (TD)

12 material differences

Tractor one

1969–1973

No measured PTO figure

Tractor two

1979–1983

No measured PTO figure

Which should you choose?

Read our verdict on the 220 Landhandler and the 1380 (TD) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 3 fields identical or within 5%, which is not counted as material

ALLIS-CHALMERS 220 Landhandler and SOMECA 1380 (TD), field by field
Field	220 Landhandler	1380 (TD)	Gap
Engine
Engine power, claimed claimed	136.1 hp	133.2 hp	—
Engine declared	ALLIS-CHALMERS D-3500	FIAT-IVECO 8065.24.000	differs
Displacement declared	6.97 L	5.50 L	+27% 220 Landhandler
Maximum torque declared	—	347 lb·ft · 470 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	15.5–18.6 mph · 25–30 km/h	differs
Clutch declared	—	Pedal operated Ferodo or LuK single-disc clutch	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	16.5 gpm · 62.5 L/min	14.1 gpm · 53.5 L/min	+17% 220 Landhandler
Pressure declared	—	3,263–3,408 psi · 225–235 bar	—
Three-point lift at ends declared	6,001 lb · 2,722 kg	10,878 lb · 4,934 kg	+81% 1380 (TD)
Rear PTO speeds declared	1000 rpm	1000 rpm	—
Weight & dimensions
Unladen weight declared	12,161 lb · 5,516 kg	10,748 lb · 4,875 kg	+13% 220 Landhandler
Maximum permissible mass declared	—	19,070 lb · 8,650 kg	—
Wheelbase declared	100.0 in · 2,539 mm	108.3 in · 2,750 mm	+8% 1380 (TD)
Length declared	164.0 in · 4,166 mm	162.8 in · 4,135 mm	—
Width declared	96.0 in · 2,438 mm	85.0 in · 2,160 mm	+13% 220 Landhandler
Height declared	84.0 in · 2,134 mm	108.5 in · 2,755 mm	+29% 1380 (TD)
Ground clearance declared	21.0 in · 533 mm	26.2 in · 665 mm	+25% 1380 (TD)
Turning radius, braked declared	11.3 ft · 3.45 m	13.9 ft · 4.25 m	+23% 1380 (TD)
Fuel tank declared	203.9 qt · 193.0 L	295.9 qt · 280.0 L	+45% 1380 (TD)

Source

Source