ALLIS-CHALMERS 185 vs Fiat 750 (DT)

10 material differences · fewer than 12

Tractor one

1970–1981

No measured PTO figure

Tractor two

1968–1971

No measured PTO figure

Which should you choose?

Read our verdict on the 185 and the 750 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 5 fields identical or within 5%, which is not counted as material

ALLIS-CHALMERS 185 and Fiat 750 (DT), field by field
Field	185	750 (DT)	Gap
Engine
Engine power, claimed claimed	74.0 hp	74.0 hp	—
Engine declared	ALLIS-CHALMERS D-2800	O.M.-FIAT CO 3/70	differs
Displacement declared	4.93 L	4.56 L	+8% 185
Maximum torque declared	—	206 lb·ft · 279 N·m	—
Transmission
Top speed declared	15.5 mph · 25 km/h	14.9 mph · 24 km/h	—
Clutch declared	—	Pedal-operated two-stage dry FEREDO double clutch	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	20.0 gpm · 75.7 L/min	7.3 gpm · 27.5 L/min	+175% 185
Pressure declared	—	2,843 psi · 196 bar	—
Three-point lift at ends declared	2,500 lb · 1,134 kg	4,960 lb · 2,250 kg	+98% 750 (DT)
Rear PTO speeds declared	540 rpm	540 rpm / 1000 rpm	differs
Weight & dimensions
Unladen weight declared	8,699 lb · 3,946 kg	6,713 lb · 3,045 kg	+30% 185
Wheelbase declared	99.2 in · 2,519 mm	96.1 in · 2,440 mm	—
Length declared	158.0 in · 4,013 mm	153.9 in · 3,910 mm	—
Width declared	76.5 in · 1,943 mm	72.0 in · 1,830 mm	+6% 185
Height declared	95.6 in · 2,428 mm	69.9 in · 1,775 mm	+37% 185
Ground clearance declared	20.5 in · 521 mm	20.5 in · 520 mm	—
Turning radius, braked declared	10.2 ft · 3.12 m	12.5 ft · 3.80 m	+22% 750 (DT)
Fuel tank declared	98.3 qt · 93.0 L	85.6 qt · 81.0 L	+15% 185

Source

Source