10 material differences · fewer than 12

Tractor oneAllgaier R221949–1952No measured PTO figureTractor twoBOLINDER-MUNKTELL BM-101947–1952No measured PTO figure

Which should you choose?

Read our verdict on the R22 and the BM-10 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

10 material differences · 2 fields identical or within 5%, which is not counted as material

Allgaier R22 and BOLINDER-MUNKTELL BM-10, field by field
Field	R22	BM-10	Gap
Engine
Engine power, claimed claimed	21.7 hp	22.7 hp	—
Engine declared	Kaelble R 18	BOLINDER W-3	differs
Displacement declared	1.84 L	2.71 L	+47% BM-10
Transmission
Top speed declared	11.8 mph · 19 km/h	12.4 mph · 20 km/h	+5% BM-10
Clutch declared	Single-plate dry clutch by Fichtel & Sachs, type: K 12 Z	Pedal operated dry single-plate clutch	differs
Hydraulics & hitch
Rear PTO speeds declared	540/600 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	3,748 lb · 1,700 kg	2,701 lb · 1,225 kg	+39% R22
Wheelbase declared	59.1 in · 1,500 mm	65.0 in · 1,650 mm	+10% BM-10
Length declared	102.4 in · 2,600 mm	100.4 in · 2,550 mm	—
Width declared	59.8 in · 1,520 mm	63.0 in · 1,600 mm	+5% BM-10
Ground clearance declared	13.8 in · 350 mm	15.7 in · 400 mm	+14% BM-10
Turning radius, braked declared	9.0 ft · 2.75 m	—	—
Fuel tank declared	29.6 qt · 28 L	37.2 qt · 35.2 L	+26% BM-10

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Allgaier R22 sources

Source

Source: Traktorenlexikon, “Allgaier R22”

BOLINDER-MUNKTELL BM-10 sources