AGRIFULL 80-75 (DT) vs Deutz-Fahr DX 3.75 A

10 material differences · fewer than 12

Tractor one

1980–1986

No measured PTO figure

Tractor two

1993–1996

No measured PTO figure

Which should you choose?

Read our verdict on the 80-75 (DT) and the DX 3.75 A → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 4 fields identical or within 5%, which is not counted as material

AGRIFULL 80-75 (DT) and Deutz-Fahr DX 3.75 A, field by field
Field	80-75 (DT)	DX 3.75 A	Gap
Engine
Engine power, claimed claimed	77.0 hp	76.6 hp	—
Engine declared	V.M.-MOTTORI 1050 NS/SU	KHD F4L 913	differs
Displacement declared	3.46 L	4.09 L	+18% DX 3.75 A
Maximum torque declared	—	183 lb·ft · 248 N·m	—
Transmission
Top speed declared	15.5 mph · 25 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	—	Independent dry double clutch	—
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	7.9 gpm · 30.0 L/min	10.6 gpm · 40.0 L/min	+33% DX 3.75 A
Pressure declared	3,118 psi · 215 bar	3,481 psi · 240 bar	+12% DX 3.75 A
Three-point lift at ends declared	—	7,275 lb · 3,300 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	6,504 lb · 2,950 kg	7,077 lb · 3,210 kg	+9% DX 3.75 A
Maximum permissible mass declared	—	11,023 lb · 5,000 kg	—
Wheelbase declared	92.5 in · 2,350 mm	88.6 in · 2,250 mm	—
Length declared	143.3 in · 3,640 mm	141.7 in · 3,600 mm	—
Width declared	76.0 in · 1,930 mm	84.2 in · 2,138 mm	+11% DX 3.75 A
Height declared	102.4 in · 2,600 mm	92.2 in · 2,341 mm	+11% 80-75 (DT)
Ground clearance declared	14.6 in · 370 mm	16.1 in · 408 mm	+10% DX 3.75 A
Turning radius, braked declared	—	12.8 ft · 3.90 m	—
Fuel tank declared	84.5 qt · 80.0 L	91.9 qt · 87 L	+9% DX 3.75 A

Source

Source