AGRIFULL 80-75 (DT) vs Case-IH CS-78 (A)
7 material differences · fewer than 12
Which should you choose?
Read our verdict on the 80-75 (DT) and the CS-78 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 80-75 (DT) | CS-78 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 77.0 hp | 77.0 hp | — |
| Engine declared | V.M.-MOTTORI 1050 NS/SU | MWM WD 401.81 | differs |
| Displacement declared | 3.46 L | — | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | — | Dry Fichtel & Sachs double clutch | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Open centre | — |
| Pump flow declared | 7.9 gpm · 30.0 L/min | 13.3 gpm · 50.5 L/min | +68% CS-78 (A) |
| Pressure declared | 3,118 psi · 215 bar | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 390/540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 6,504 lb · 2,950 kg | 7,430 lb · 3,370 kg | +14% CS-78 (A) |
| Maximum permissible mass declared | — | 14,330 lb · 6,500 kg | — |
| Wheelbase declared | 92.5 in · 2,350 mm | 95.3 in · 2,420 mm | — |
| Length declared | 143.3 in · 3,640 mm | 158.5 in · 4,025 mm | +11% CS-78 (A) |
| Width declared | 76.0 in · 1,930 mm | 73.7 in · 1,873 mm | — |
| Height declared | 102.4 in · 2,600 mm | 104.7 in · 2,660 mm | — |
| Ground clearance declared | 14.6 in · 370 mm | — | — |
| Fuel tank declared | 84.5 qt · 80.0 L | 105.7 qt · 100.0 L | +25% CS-78 (A) |
AGRIFULL 80-75 (DT) sources
Source
- Source: Traktorenlexikon, “Agrifull 80-75”
Case-IH CS-78 (A) sources
Source
- Source: Traktorenlexikon, “Case-IH CS78”