7 material differences · fewer than 12
Tractor oneAGRIFULL 80-70 F (DT)1980–1986No measured PTO figureTractor twoLandini TL 32 A (DT) "R 6530 F"1983–1987No measured PTO figure
Which should you choose?
Read our verdict on the 80-70 F (DT) and the TL 32 A (DT) "R 6530 F" → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 80-70 F (DT) | TL 32 A (DT) "R 6530 F" | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 67 hp | 63.2 hp | +6% 80-70 F (DT) |
| Engine declared | FIAT-IVECO 8045.00 | Perkins A 4.236 | differs |
| Displacement declared | 3.46 L | 3.87 L | +12% TL 32 A (DT) "R 6530 F" |
| Maximum torque declared | 162 lb·ft · 219 N·m | 176 lb·ft · 239 N·m | +9% TL 32 A (DT) "R 6530 F" |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 18.6 mph · 30 km/h | +20% TL 32 A (DT) "R 6530 F" |
| Hydraulics & hitch | |||
| Pump flow declared | 5.8 gpm · 22.0 L/min | 9.8 gpm · 37.1 L/min | +69% TL 32 A (DT) "R 6530 F" |
| Pressure declared | 3,118 psi · 215 bar | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 4,916 lb · 2,230 kg | 4,497 lb · 2,040 kg | +9% 80-70 F (DT) |
| Wheelbase declared | 79.5 in · 2,020 mm | 81.5 in · 2,071 mm | — |
| Length declared | 141.7 in · 3,600 mm | 137.0 in · 3,480 mm | — |
| Width declared | 53.9–77.6 in · 1,370–1,970 mm | 53.5–75.0 in · 1,358–1,904 mm | — |
| Ground clearance declared | 14.2 in · 360 mm | 13.9 in · 353 mm | — |
| Turning radius, braked declared | — | 11.1 ft · 3.38 m | — |
| Fuel tank declared | 52.8 qt · 50.0 L | 56.0 qt · 53.0 L | +6% TL 32 A (DT) "R 6530 F" |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
AGRIFULL 80-70 F (DT) sources
- Source: Traktorenlexikon, “Agrifull 80-70 F”
Landini TL 32 A (DT) "R 6530 F" sources
- Source: Traktorenlexikon, “Landini TL 32 (DT)”
- Source: Traktorenlexikon, “Massey Ferguson MF 168 & MF 168A”