AGRIFULL 80-56 (DT) vs International Harvester 585

9 material differences · fewer than 12

Tractor one

1980–1986

No measured PTO figure

Tractor two

1981–1990

No measured PTO figure

Which should you choose?

Read our verdict on the 80-56 (DT) and the 585 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 5 fields identical or within 5%, which is not counted as material

AGRIFULL 80-56 (DT) and International Harvester 585, field by field
Field	80-56 (DT)	585	Gap
Engine
Engine power, claimed claimed	57.3 hp	58.2 hp	—
Engine declared	MWM D-227-3	INTERNATIONAL-HARVESTER D-206	differs
Displacement declared	2.83 L	3.38 L	+20% 585
Maximum torque declared	127 lb·ft · 172 N·m	161 lb·ft · 218 N·m	+27% 585
Transmission
Top speed declared	15.5 mph · 25 km/h	15.5 mph · 25 km/h	—
Clutch declared	—	Pedal-operated dry LAYCOCK single-disc clutch	—
Hydraulics & hitch
Pump flow declared	5.8 gpm · 22.0 L/min	—	—
Pressure declared	—	2,698 psi · 186 bar	—
Three-point lift at ends declared	—	4,398 lb · 1,995 kg	—
Rear PTO speeds declared	540 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	5,071 lb · 2,300 kg	6,393 lb · 2,900 kg	+26% 585
Wheelbase declared	85.6 in · 2,175 mm	85.0 in · 2,159 mm	—
Length declared	129.8 in · 3,298 mm	142.1 in · 3,610 mm	+9% 585
Width declared	76.0 in · 1,930 mm	72.8 in · 1,850 mm	—
Height declared	98.6 in · 2,504 mm	103.1 in · 2,620 mm	—
Ground clearance declared	19.5 in · 495 mm	14.1 in · 358 mm	+38% 80-56 (DT)
Turning radius, braked declared	12.5 ft · 3.80 m	10.7 ft · 3.25 m	+17% 80-56 (DT)
Fuel tank declared	84.5 qt · 80.0 L	118.3 qt · 112.0 L	+40% 585

Source

Source