10 material differences · fewer than 12
Tractor oneAGRIFULL 60 DT1976–1977No measured PTO figureTractor twoUTB U-530 (DTC)1982–1985No measured PTO figure
Which should you choose?
Read our verdict on the 60 DT and the U-530 (DTC) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 60 DT | U-530 (DTC) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 53.2 hp | 53.2 hp | — |
| Engine declared | V.M.-MOTORI 1053 SU | UTB D-115.050 | differs |
| Displacement declared | 2.86 L | 2.70 L | +6% 60 DT |
| Maximum torque declared | 127 lb·ft · 172 N·m | 119 lb·ft · 162 N·m | +6% 60 DT |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 14.9 mph · 24 km/h | — |
| Clutch declared | dry VALEO or LuK double clutch | Dry double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 5.8 gpm · 22.0 L/min | 5.8 gpm · 21.8 L/min | — |
| Pressure declared | 3,118 psi · 215 bar | — | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 5,027 lb · 2,280 kg | 4,233 lb · 1,920 kg | +19% 60 DT |
| Wheelbase declared | 84.4 in · 2,145 mm | 77.2 in · 1,960 mm | +9% 60 DT |
| Length declared | 143.7 in · 3,650 mm | 116.9 in · 2,970 mm | +23% 60 DT |
| Width declared | 68.5 in · 1,740 mm | 61.8–87.2 in · 1,570–2,215 mm | differs |
| Ground clearance declared | 13.0 in · 330 mm | 18.3 in · 465 mm | +41% U-530 (DTC) |
| Turning radius, braked declared | — | 12.0 ft · 3.65 m | — |
| Fuel tank declared | 84.5 qt · 80.0 L | 57.1 qt · 54.0 L | +48% 60 DT |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
AGRIFULL 60 DT sources
- Source: Traktorenlexikon, “Agrifull 60”
UTB U-530 (DTC) sources
- Source: Traktorenlexikon, “UTB U 530”