12 material differences
Tractor oneAGRIFULL 355-C1976–1977No measured PTO figureTractor twoLandini 6030 (DT) TL-39 N/B (TL-39 DT/B)1983–1987No measured PTO figure
Which should you choose?
Read our verdict on the 355-C and the 6030 (DT) TL-39 N/B (TL-39 DT/B) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
12 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | 355-C | 6030 (DT) TL-39 N/B (TL-39 DT/B) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 55.3 hp | 55.3 hp | — |
| Engine declared | V.M.-MOTORI 1053 | Perkins AT 3.152-4 | differs |
| Displacement declared | 2.86 L | 2.50 L | +14% 355-C |
| Maximum torque declared | 127 lb·ft · 172 N·m | 131 lb·ft · 178 N·m | — |
| Transmission | |||
| Top speed declared | 6.2 mph · 10 km/h | 18.6 mph · 30 km/h | +200% 6030 (DT) TL-39 N/B (TL-39 DT/B) |
| Clutch declared | Hand lever operated dry single disc clutch with dead center engagement | Dry and air-cooled OMG or LuK double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 5.3 gpm · 20.0 L/min | 9.6 gpm · 36.5 L/min | +83% 6030 (DT) TL-39 N/B (TL-39 DT/B) |
| Pressure declared | — | 2,901 psi · 200 bar | — |
| Rear PTO speeds declared | 540 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,335 lb · 2,420 kg | 4,971 lb · 2,255 kg | +7% 355-C |
| Wheelbase declared | 47.2 in · 1,200 mm | 81.9 in · 2,080 mm | +73% 6030 (DT) TL-39 N/B (TL-39 DT/B) |
| Length declared | 86.6 in · 2,200 mm | 138.2 in · 3,510 mm | +60% 6030 (DT) TL-39 N/B (TL-39 DT/B) |
| Width declared | 45.2 in · 1,147 mm | 75.6 in · 1,920 mm | +67% 6030 (DT) TL-39 N/B (TL-39 DT/B) |
| Ground clearance declared | 11.0 in · 280 mm | 19.5 in · 495 mm | +77% 6030 (DT) TL-39 N/B (TL-39 DT/B) |
| Turning radius, braked declared | — | 12.4 ft · 3.79 m | — |
| Fuel tank declared | 47.6 qt · 45.0 L | 63.9 qt · 60.5 L | +34% 6030 (DT) TL-39 N/B (TL-39 DT/B) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
AGRIFULL 355-C sources
- Source: Traktorenlexikon, “Agrifull 355 C”
Landini 6030 (DT) TL-39 N/B (TL-39 DT/B) sources
- Source: Traktorenlexikon, “Landini 6030 (DT)”
- Source: Traktorenlexikon, “Massey Ferguson MF 253”