12 material differences
Tractor oneAgco RT-952002–2004No measured PTO figureTractor twoNew Holland T 50502008–2012No measured PTO figure
Which should you choose?
Read our verdict on the RT-95 and the T 5050 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
12 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | RT-95 | T 5050 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 95.6 hp | 95.6 hp | — |
| Engine declared | CUMMINS 6 BT-5.9 | IVECO-NEF F4CE 9484 M | differs |
| Displacement declared | 5.88 L | 4.49 L | +31% RT-95 |
| Maximum torque declared | 325 lb·ft · 440 N·m | 309 lb·ft · 419 N·m | — |
| Transmission | |||
| Top speed declared | 24.9 mph · 40 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | Pedal-operated wet VALEO multi-disc clutch, five discs with 250 mm diameter | electrohydraulically operated wet multi-disc clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | 29.4 gpm · 111.3 L/min | 17.5 gpm · 66.1 L/min | +68% RT-95 |
| Pressure declared | 3,336 psi · 230 bar | 3,336 psi · 230 bar | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/540E/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 10,399 lb · 4,717 kg | 8,168 lb · 3,705 kg | +27% RT-95 |
| Maximum permissible mass declared | — | 14,991 lb · 6,800 kg | — |
| Wheelbase declared | 107.8 in · 2,739 mm | 92.2 in · 2,342 mm | +17% RT-95 |
| Length declared | 173.0 in · 4,394 mm | 158.7 in · 4,030 mm | +9% RT-95 |
| Width declared | 113.4 in · 2,880 mm | 78.9 in · 2,005 mm | +44% RT-95 |
| Ground clearance declared | 18.1 in · 460 mm | 19.2 in · 488 mm | +6% T 5050 |
| Fuel tank declared | 169.1 qt · 160.0 L | 134.2 qt · 127.0 L | +26% RT-95 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Agco RT-95 sources
Source
- Source: Traktorenlexikon, “AGCO RT 95”
- Source: Traktorenlexikon, “White 6124”
New Holland T 5050 sources
Source
- Source: Traktorenlexikon, “New Holland T5050”