Agco RT-100 (Traktorenlexikon) vs VALMET 6550 HiTech

9 material differences · fewer than 12

Tractor one

2004–2005

No measured PTO figure

Tractor two

1998–2006

No measured PTO figure

Which should you choose?

Read our verdict on the RT-100 and the 6550 HiTech → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 4 fields identical or within 5%, which is not counted as material

Agco RT-100 (Traktorenlexikon) and VALMET 6550 HiTech, field by field
Field	RT-100	6550 HiTech	Gap
Engine
Engine power, claimed claimed	98.6 hp	98.6 hp	—
Engine declared	CUMMINS 6 BTA 6.7	VALMET 420 DWRE or 44 ET	differs
Displacement declared	6.83 L	4.40 L	+55% RT-100
Maximum torque declared	311 lb·ft · 422 N·m	—	—
Transmission
Top speed declared	24.9 mph · 40 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	—	Electrically-operated dry single-disc clutch	—
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Hydraulic control declared	Load sensing	—	—
Pump flow declared	33.7 gpm · 127.4 L/min	18.7 gpm · 70.8 L/min	+80% RT-100
Pressure declared	3,336 psi · 230 bar	—	—
Three-point lift at ends declared	—	12,346 lb · 5,600 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	15,223 lb · 6,905 kg	10,406 lb · 4,720 kg	+46% RT-100
Maximum permissible mass declared	—	16,535 lb · 7,500 kg	—
Wheelbase declared	109.4 in · 2,780 mm	92.1 in · 2,340 mm	+19% RT-100
Length declared	183.9 in · 4,670 mm	178.0 in · 4,520 mm	—
Width declared	88.6 in · 2,250 mm	92.9 in · 2,360 mm	—
Height declared	114.2 in · 2,900 mm	107.1 in · 2,720 mm	+7% RT-100
Ground clearance declared	14.6 in · 370 mm	17.1 in · 434 mm	+17% 6550 HiTech
Fuel tank declared	317.0 qt · 300.0 L	174.4 qt · 165.0 L	+82% RT-100

Source

Source