8 material differences · fewer than 12

Tractor oneAgco LT-95 A2008–2010No measured PTO figureTractor twoMassey Ferguson MF 6460 A2003–2013No measured PTO figure

Which should you choose?

We will not advise between these two machines, because the drive differs (4WD; Two-wheel or four-wheel drive). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.

Field by field

8 material differences · 6 fields identical or within 5%, which is not counted as material

Agco LT-95 A and Massey Ferguson MF 6460 A, field by field
Field	LT-95 A	MF 6460 A	Gap
Engine
Engine power, claimed claimed	113.5 hp	113.5 hp	—
Engine declared	SISU-DIESEL 44 CTA	Perkins 1104 C-44 TA	differs
Displacement declared	4.40 L	4.40 L	—
Maximum torque declared	369 lb·ft · 500 N·m	—	—
Transmission
Top speed declared	24.9 mph · 40 km/h	24.9–31.1 mph · 40–50 km/h	differs
Clutch declared	Pedal-operated electro-hydraulic wet multi-disc clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	14.5 gpm · 54.9 L/min	29.0 gpm · 109.8 L/min	+100% MF 6460 A
Pressure declared	3,046 psi · 210 bar	3,336 psi · 230 bar	+10% MF 6460 A
Rear PTO speeds declared	540 rpm / 1000 rpm	540 rpm / 1000 rpm	—
Weight & dimensions
Unladen weight declared	11,069 lb · 5,021 kg	9,987 lb · 4,530 kg	+11% LT-95 A
Maximum permissible mass declared	—	19,401 lb · 8,800 kg	—
Wheelbase declared	108.4 in · 2,754 mm	100.5 in · 2,553 mm	+8% LT-95 A
Length declared	172.0 in · 4,369 mm	166.3 in · 4,225 mm	—
Width declared	79.3 in · 2,014 mm	70.5–100.4 in · 1,790–2,550 mm	differs
Height, over the cab declared	110.3 in · 2,802 mm	111.8 in · 2,840 mm	—
Ground clearance declared	18.5 in · 470 mm	17.7 in · 449 mm	—
Fuel tank declared	152.0 qt · 143.8 L	137.4–200.8 qt · 130.0–190.0 L	differs

Agco LT-95 A sources

Source

Source: Traktorenlexikon, “AGCO LT 95 A”
Source: Traktorenlexikon, “AGCO LT 85 A”

Massey Ferguson MF 6460 A sources