9 material differences · fewer than 12
Tractor oneAgco LT-85 A (Traktorenlexikon)2008–2010No measured PTO figureTractor twoUTB U-1033 (DT)1994–2004No measured PTO figure
Which should you choose?
Read our verdict on the LT-85 A and the U-1033 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | LT-85 A | U-1033 (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 103.5 hp | 103.5 hp | — |
| Engine declared | SISU-DIESEL 44 CTA | UTB 261.073 | differs |
| Displacement declared | 4.40 L | 5.64 L | +28% U-1033 (DT) |
| Maximum torque declared | 370 lb·ft · 501 N·m | 271 lb·ft · 368 N·m | +36% LT-85 A |
| Transmission | |||
| Top speed declared | 24.9 mph · 40 km/h | 15.5 mph · 25 km/h | +60% LT-85 A |
| Clutch declared | Pedal-operated electrohydraulic wet multi-disc clutch | dry U.T.B. double clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | 16.2 gpm · 61.3 L/min | — | — |
| Pressure declared | 3,046 psi · 210 bar | 2,031 psi · 140 bar | +50% LT-85 A |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 10,604 lb · 4,810 kg | 9,700 lb · 4,400 kg | +9% LT-85 A |
| Wheelbase declared | 97.0 in · 2,464 mm | 100.4 in · 2,550 mm | — |
| Length declared | 172.0 in · 4,369 mm | 172.8 in · 4,390 mm | — |
| Width declared | 79.3 in · 2,014 mm | 76.3 in · 1,939 mm | — |
| Ground clearance declared | — | 13.8 in · 350 mm | — |
| Turning radius, braked declared | — | 14.8 ft · 4.50 m | — |
| Fuel tank declared | 152.0 qt · 143.8 L | 169.1 qt · 160.0 L | +11% U-1033 (DT) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Agco LT-85 A (Traktorenlexikon) sources
- Source: Traktorenlexikon, “AGCO LT 85 A”
UTB U-1033 (DT) sources
- Source: Traktorenlexikon, “UTB U 1033 DT”