9 material differences · fewer than 12
Tractor oneAgco LT-702002–2004No measured PTO figureTractor twoFendt 370 GT1996–2004No measured PTO figure
Which should you choose?
Read our verdict on the LT-70 and the 370 GT → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | LT-70 | 370 GT | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 70.0 hp | 70 hp | — |
| Engine declared | CUMMINS B 3.9 T | KHD F4 L 913 H | differs |
| Displacement declared | 3.93 L | 3.77 L | — |
| Maximum torque declared | 235 lb·ft · 319 N·m | — | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 24.9 mph · 40 km/h | +33% 370 GT |
| Clutch declared | Pedal-operated dry single-disc clutch | Dual dry clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 10.6 gpm · 40.1 L/min | 10.6 gpm · 40.0 L/min | — |
| Pressure declared | 3,046 psi · 210 bar | 2,611 psi · 180 bar | +17% LT-70 |
| Rear PTO speeds declared | 540/1000 rpm | 540/750/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 8,150 lb · 3,697 kg | 7,915 lb · 3,590 kg | — |
| Maximum permissible mass declared | — | 11,662 lb · 5,290 kg | — |
| Wheelbase declared | 96.0 in · 2,438 mm | 126.4 in · 3,210 mm | +32% 370 GT |
| Length declared | 165.0 in · 4,191 mm | 182.3 in · 4,630 mm | +10% 370 GT |
| Width declared | 83.0 in · 2,108 mm | 72.8 in · 1,850 mm | +14% LT-70 |
| Ground clearance declared | — | 19.7 in · 500 mm | — |
| Turning radius, braked declared | — | 13.5 ft · 4.10 m | — |
| Fuel tank declared | 136.0 qt · 128.7 L | 84.5 qt · 80 L | +61% LT-70 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Agco LT-70 sources
- Source: Traktorenlexikon, “AGCO LT 70”
- Source: Traktorenlexikon, “White 6410”
Fendt 370 GT sources
- Source: Traktorenlexikon, “Fendt F 370 GT”