12 material differences

Tractor oneAgco GT-752004–2007No measured PTO figureTractor twoCASE-INTERNATIONAL 895 (DT)1990–1993No measured PTO figure

Which should you choose?

Read our verdict on the GT-75 and the 895 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 2 fields identical or within 5%, which is not counted as material

Agco GT-75 and CASE-INTERNATIONAL 895 (DT), field by field
Field	GT-75	895 (DT)	Gap
Engine
Engine power, claimed claimed	82 hp	82 hp	—
Engine declared	SAME-DEUTZ-FAHR 1000.4 AT 5	IHC D-268	differs
Displacement declared	4.00 L	4.39 L	+10% 895 (DT)
Maximum torque declared	237 lb·ft · 321 N·m	209 lb·ft · 284 N·m	+13% GT-75
Transmission
Top speed declared	24.9 mph · 40 km/h	21.7 mph · 35 km/h	+14% GT-75
Clutch declared	Pedal-operated dry single-disc clutch	Pedal-operated dry Rockford single-plate clutch as driving clutch	differs
Hydraulics & hitch
Pump flow declared	11.7 gpm · 44.3 L/min	—	—
Pressure declared	3,118 psi · 215 bar	—	—
Rear PTO speeds declared	540 rpm / 1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	6,038 lb · 2,739 kg	6,863 lb · 3,113 kg	+14% 895 (DT)
Wheelbase declared	88.0 in · 2,235 mm	88.0 in · 2,235 mm	—
Length declared	151.6 in · 3,851 mm	142.0 in · 3,607 mm	+7% GT-75
Width declared	76.7–88.9 in · 1,948–2,258 mm	78.0 in · 1,981 mm	differs
Height, over the cab declared	106.0 in · 2,692 mm	97.4 in · 2,474 mm	+9% GT-75
Ground clearance declared	17.5 in · 445 mm	22.0 in · 559 mm	+26% 895 (DT)
Fuel tank declared	94.8 qt · 89.7 L	118.3 qt · 112.0 L	+25% 895 (DT)

Source

Source