Agco GT-45 vs Fiat 50-66 S (DT)

12 material differences

Tractor one

2004–2007

No measured PTO figure

Tractor two

1992–1995

No measured PTO figure

Which should you choose?

Read our verdict on the GT-45 and the 50-66 S (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 3 fields identical or within 5%, which is not counted as material

Agco GT-45 and Fiat 50-66 S (DT), field by field
Field	GT-45	50-66 S (DT)	Gap
Engine
Engine power, claimed claimed	51.2 hp	49.3 hp	—
Engine declared	SAME-DEUTZ-FAHR 1000.3	FIAT-IVECO 8035.06	differs
Displacement declared	3.00 L	2.71 L	+11% GT-45
Maximum torque declared	151 lb·ft · 205 N·m	130 lb·ft · 176 N·m	+16% GT-45
Transmission
Top speed declared	24.9 mph · 40 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated, dry single-disc clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	Open centre	—
Pump flow declared	22.7 gpm · 85.9 L/min	9.1 gpm · 34.5 L/min	+149% GT-45
Pressure declared	—	3,118 psi · 215 bar	—
Three-point lift at ends declared	—	4,685 lb · 2,125 kg	—
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	5,333 lb · 2,419 kg	4,685 lb · 2,125 kg	+14% GT-45
Maximum permissible mass declared	—	8,488 lb · 3,850 kg	—
Wheelbase declared	82.9 in · 2,105 mm	78.7 in · 1,999 mm	+5% GT-45
Length declared	145.7 in · 3,701 mm	127.6 in · 3,241 mm	+14% GT-45
Width declared	70.4 in · 1,788 mm	60.6 in · 1,540 mm	+16% GT-45
Height declared	103.6 in · 2,631 mm	88.4 in · 2,245 mm	+17% GT-45
Ground clearance declared	17.5 in · 445 mm	17.9 in · 455 mm	—
Turning radius, braked declared	10.0 ft · 3.06 m	—	—
Fuel tank declared	94.8 qt · 89.7 L	77.1 qt · 73.0 L	+23% GT-45

Source

Source