Agco DT-240 A vs New Holland T 8040

8 material differences · fewer than 12

Tractor one

2005–2008

No measured PTO figure

Tractor two

2006–2011

No measured PTO figure

Which should you choose?

Read our verdict on the DT-240 A and the T 8040 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 7 fields identical or within 5%, which is not counted as material

Agco DT-240 A and New Holland T 8040, field by field
Field	DT-240 A	T 8040	Gap
Engine
Engine power, claimed claimed	286.0 hp	303.7 hp	+6% T 8040
Engine declared	SISU-DIESEL 84 ETA	CUMMINS 6 TAA-8304 (TIER-III)	differs
Displacement declared	8.42 L	8.27 L	—
Maximum torque declared	814 lb·ft · 1,103 N·m	965 lb·ft · 1,309 N·m	+19% T 8040
Transmission
Top speed declared	24.9–31.1 mph · 40–50 km/h	24.9–31.1 mph · 40–50 km/h	—
Clutch declared	—	Electro-hydraulically operated wet multi-plate clutch	—
Hydraulics & hitch
Hydraulic control declared	Load sensing	—	—
Pump flow declared	36.9 gpm · 139.8 L/min	44.0 gpm · 166.6 L/min	+19% T 8040
Pressure declared	—	3,336 psi · 230 bar	—
Three-point lift at ends declared	14,648 lb · 6,644 kg	22,494 lb · 10,203 kg	+54% T 8040
Rear PTO speeds declared	540/1000/540E rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	20,371 lb · 9,240 kg	21,839 lb · 9,906 kg	+7% T 8040
Maximum permissible mass declared	30,865 lb · 14,000 kg	30,865 lb · 14,000 kg	—
Wheelbase declared	121.1 in · 3,075 mm	121.2 in · 3,078 mm	—
Length declared	209.4 in · 5,320 mm	229.5 in · 5,829 mm	+10% T 8040
Width declared	100.4 in · 2,550 mm	98.0 in · 2,490 mm	—
Height declared	125.2 in · 3,180 mm	131.1 in · 3,331 mm	—
Ground clearance declared	19.7 in · 500 mm	14.6 in · 372 mm	+34% DT-240 A
Fuel tank declared	697.4 qt · 660.0 L	720.7 qt · 682.0 L	—

Source

Source