8 material differences · fewer than 12

Tractor oneAgco DT-225 B2009–2010No measured PTO figureTractor twoCase-IH MX 2552002–2005No measured PTO figure

Which should you choose?

Read our verdict on the DT-225 B and the MX 255 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 6 fields identical or within 5%, which is not counted as material

Agco DT-225 B and Case-IH MX 255, field by field
Field	DT-225 B	MX 255	Gap
Engine
Engine power, claimed claimed	261.4 hp	258.4 hp	—
Engine declared	SISU-DIESEL 84 CTA-4V	CUMMINS 6 TAA-8304	differs
Displacement declared	8.42 L	8.27 L	—
Maximum torque declared	—	878 lb·ft · 1,191 N·m	—
Transmission
Top speed declared	24.9–31.1 mph · 40–50 km/h	24.9 mph · 40 km/h	differs
Clutch declared	—	Case-IH multi-disc clutch running in oil bath	—
Hydraulics & hitch
Hydraulic centre declared	—	Closed centre	—
Hydraulic control declared	Load sensing	—	—
Pump flow declared	27.9 gpm · 105.5 L/min	38.6 gpm · 146.1 L/min	+38% MX 255
Pressure declared	3,336 psi · 230 bar	3,597 psi · 248 bar	+8% MX 255
Rear PTO speeds declared	1000 rpm	1000 rpm	—
Weight & dimensions
Unladen weight declared	25,838 lb · 11,720 kg	21,559 lb · 9,779 kg	+20% DT-225 B
Maximum permissible mass declared	—	30,865 lb · 14,000 kg	—
Wheelbase declared	122.2 in · 3,105 mm	118.3 in · 3,005 mm	—
Length declared	215.7 in · 5,479 mm	224.0 in · 5,690 mm	—
Width declared	79.3 in · 2,014 mm	120.0–150.0 in · 3,048–3,810 mm	differs
Height, over the cab declared	141.0 in · 3,581 mm	124.0 in · 3,150 mm	+14% DT-225 B
Ground clearance declared	18.5 in · 470 mm	13.8 in · 350 mm	+34% DT-225 B
Turning radius, braked declared	24.3 ft · 7.40 m	—	—
Fuel tank declared	623.4 qt · 590.0 L	639.3 qt · 605.0 L	—

Source

Source