9 material differences · fewer than 12

Tractor oneAgco DT-225 B2009–2010No measured PTO figureTractor twoCase-IH 7250 PRO/89501997–1999No measured PTO figure

Which should you choose?

Read our verdict on the DT-225 B and the 7250 PRO/8950 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 5 fields identical or within 5%, which is not counted as material

Agco DT-225 B and Case-IH 7250 PRO/8950, field by field
Field	DT-225 B	7250 PRO/8950	Gap
Engine
Engine power, claimed claimed	261.4 hp	257 hp	—
Engine declared	SISU-DIESEL 84 CTA-4V	CUMMINS 6 TA-830	differs
Displacement declared	8.42 L	8.27 L	—
Maximum torque declared	—	771 lb·ft · 1,046 N·m	—
Transmission
Top speed declared	24.9–31.1 mph · 40–50 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	—	Oil-immersed multi-plate clutch	—
Hydraulics & hitch
Hydraulic control declared	Load sensing	—	—
Pump flow declared	27.9 gpm · 105.5 L/min	29.7 gpm · 112.4 L/min	+7% 7250 PRO/8950
Pressure declared	3,336 psi · 230 bar	2,451 psi · 169 bar	+36% DT-225 B
Rear PTO speeds declared	1000 rpm	1000 rpm	—
Weight & dimensions
Unladen weight declared	25,838 lb · 11,720 kg	18,338 lb · 8,318 kg	+41% DT-225 B
Maximum permissible mass declared	—	25,519 lb · 11,575 kg	—
Wheelbase declared	122.2 in · 3,105 mm	118.3 in · 3,006 mm	—
Length declared	215.7 in · 5,479 mm	200.4 in · 5,090 mm	+8% DT-225 B
Width declared	79.3 in · 2,014 mm	120.0–153.1 in · 3,048–3,890 mm	differs
Height, over the cab declared	141.0 in · 3,581 mm	121.1 in · 3,077 mm	+16% DT-225 B
Ground clearance declared	18.5 in · 470 mm	19.3 in · 489 mm	—
Turning radius, braked declared	24.3 ft · 7.40 m	—	—
Fuel tank declared	623.4 qt · 590.0 L	379.4–470.2 qt · 359.0–445.0 L	differs

Source

Source