Agco DT-205 B or Fendt 724 Vario?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the DT-205 B has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 724 Vario has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Agco DT-205 B and Fendt 724 Vario, with the call on each
QuestionDT-205 B724 VarioCall
Which puts more power through the PTO shaft?176.5 kW (236.7 hp)Traktorenlexikon, “AGCO DT 205 B”174 kW (233 hp)Traktorenlexikon, “Fendt 724 Vario”Not comparableNot comparable on power at the PTO shaft: the DT-205 B has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 724 Vario has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the DT-205 B and the 724 Vario.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the DT-205 B and the 724 Vario.
Which pumps more oil for implements?95.6 L/min (25.3 gpm)Traktorenlexikon, “AGCO DT 205 B”—No figureNo call on hydraulic flow: no figure on record for the 724 Vario.
Which lifts more on the three-point hitch?11,156 kg (24,595 lb)Traktorenlexikon, “AGCO DT 205 B”9,769 kg (21,537 lb)Traktorenlexikon, “Fendt 724 Vario”Not comparableNot comparable on three-point lift: the DT-205 B: lift at the hitch ends, as stated by the source (Traktorenlexikon, “AGCO DT 205 B”); the 724 Vario: lift at an unstated point, as stated by the source (Traktorenlexikon, “Fendt 724 Vario”) — not the same quantity, basis and condition.
Which is heavier, for traction?11,720 kg (25,838 lb)Traktorenlexikon, “AGCO DT 205 B”7,900 kg (17,417 lb)Traktorenlexikon, “Fendt 724 Vario”Ahead (a fact, not an advantage)The Agco DT-205B is 48% heavier (3,820 kg / 8,422 lb) than the Fendt 724 Vario (both unladen weight, as stated by the source).
Which may carry more ballast and load?—12,500 kg (27,558 lb)Traktorenlexikon, “Fendt 724 Vario”No figureNo call on maximum permissible mass: no figure on record for the DT-205 B.
Which has the wider choice of gears?Stepless (CVT)Traktorenlexikon, “AGCO DT 205 B”Stepless (CVT)Traktorenlexikon, “Fendt 724 Vario”EvenEven on gears: every machine is stepless.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the DT-205 B and the 724 Vario.
Which is faster on the road?40 km/h (24.9 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “AGCO DT 205 B”50 km/h (31.1 mph)Traktorenlexikon, “Fendt 724 Vario”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?1000 rpmTraktorenlexikon, “AGCO DT 205 B”540/540E/1000 rpmTraktorenlexikon, “Fendt 724 Vario”AheadThe Fendt 724 Vario offers 540 rpm at the PTO, which the Agco DT-205B does not (as stated by the sources).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “AGCO DT 205 B”—No figureNo call on PTO independence: not stated for the 724 Vario.
Which drives on both axles?4WDTraktorenlexikon, “AGCO DT 205 B”4WDTraktorenlexikon, “Fendt 724 Vario”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?2009–20102011–EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Agco DT-205B is 48% heavier (3,820 kg / 8,422 lb) than the Fendt 724 Vario (both unladen weight, as stated by the source).
  • The Fendt 724 Vario offers 540 rpm at the PTO, which the Agco DT-205B does not (as stated by the sources).
  • Even on gears: every machine is stepless.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the DT-205 B has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 724 Vario has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • Not comparable on three-point lift: the DT-205 B: lift at the hitch ends, as stated by the source (Traktorenlexikon, “AGCO DT 205 B”); the 724 Vario: lift at an unstated point, as stated by the source (Traktorenlexikon, “Fendt 724 Vario”) — not the same quantity, basis and condition.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources